Installing Pci Adapters - Lenovo THINK CENTRE 9126 Guida Alla Sostituzione E All’installazione Dell’hardware Manual

5. Open the retaining clips.
Figura 9. Retaining clips
6. Position the memory module over the memory connector. Make sure that the
Figura 10. Positioning the memory module

Installing PCI adapters

This section provides information and instructions for installing and removing PCI
adapters. Your computer has four expansion connectors. There are two connectors
for PCI adapters, one PCI Express x1 adapter connector (some models), and one
for a PCI Express x16 graphics adapter connector (some models).
To install a PCI adapter:
1. Remove the computer cover. See "Removing the cover" a pagina 9.
notch 1 on the memory module aligns correctly with the connector key 2 on
the system board. Push the memory module straight down into the connector
until the retaining clips close.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to Capitolo 4, "Completing the parts
replacement", a pagina 31.
Capitolo 3. Installing options and replacing hardware
13