Capitolo 2. Overview; Additional Information Resources; Handling Static-Sensitive Devices - Lenovo THINK CENTRE 9126 Guida Alla Sostituzione E All’installazione Dell’hardware Manual

Capitolo 2. Overview

This guide is intended to be used by customers who are installing or replacing
Customer Replaceable Units (CRUs).
This guide does not include procedures for all parts. It is expected that cables,
switches, and certain mechanical parts can be replaced by trained service personnel
without the need for step-by-step procedures.
Nota: Use only the parts provided by Lenovo
This guide contains instructions for installing or replacing the following parts:
v Battery
v Hard disk drive
v Diskette drive
v Optical drive
v Heat sink and fan assembly
v System fan assembly
v Memory module
v PCI adapter card
v Keyboard
v Mouse

Additional information resources

If you have Internet access, the most up-to-date information for your computer is
available from the World Wide Web.
You can find:
v CRU removal and installation instructions
v CRU removal and installation videos
v Publications
v Troubleshooting information
v Parts information
v Downloads and drivers
v Links to other useful sources of information
v Support phone list
To access this information, point your browser to http://www.lenovo.com/support

Handling static-sensitive devices

Do not open the static-protective package containing the new part until the
defective part has been removed from the computer and you are ready to install
the new part. Static electricity, although harmless to you, can seriously damage
computer components and parts.
When you handle parts and other computer components, take these precautions to
avoid static-electricity damage:
© Lenovo 2005, 2007. Portions © IBM Corp. 2005.
™
.
3