v Use 1.8 V, 240-pin, double data rate 2 synchronous dynamic random access
v Use 256 MB, 512 MB, 1 GB, or 2 GB memory modules in any combination up to
Nota: Only DDR2 SDRAM DIMMs can be used.
To install a memory module:
1. Remove the computer cover. See "Removing the cover" a pagina 9.
2. You might have to remove the drive bay assembly to access the memory
3. Remove any parts that might prevent access to the memory connectors.
4. Locate the memory connectors. See Figura 4 a pagina 7.
12
Hardware Installation and Replacement Guide
memory (DDR2 SDRAM).
a maximum of 4.0 GB.
connectors. See "Accessing system board components and drives" a pagina 10.