4. Make sure that the notch 1 on the memory module aligns correctly with the
Figure 10. Positioning the memory module
Installing PCI adapters
This section provides information and instructions for installing PCI adapters. This
section provides information and instructions for installing adapters. Your
computer has four expansion connectors. On some system boards, there are two
connectors for PCI adapters, one PCI Express x1 adapter connector, and one for a
PCI Express x16 graphics adapter connector. On some system boards, there are two
PCI Express x1 adapter connectors, one PCI adapter connector, and one for a PCI
Express x16 graphics adapter connector.
To install a PCI adapter:
1. Remove the computer cover. See "Removing the cover" on page 13.
connector key 2 on the system board. Push the memory module straight
down into the connector until the retaining clips close.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to Chapter 4, "Completing the parts
replacement," on page 47.
Chapter 3. Installing options and replacing hardware
17