LG PA45** Owner's Manual page 45

NOTE
The method of changing display resolution
y
settings may vary according to the
computer's configuration.
Pentouch does not support dual monitor
y
mode or duplicate (mirror) monitor mode.
Check that the PC screen is set to only be
displayed on the TV.
The switch screen key of the laptop may be
y
subject to change by the manufacturer.
CAUTION
The double-click function may not work
y
as intended in Windows XP and Vista
because these operating systems do not
use touch drivers.
The Pentouch operation may become
y
slow depending on the computer's
performance.
The screen size may change if you
y
disconnect the computer's output port
and connect it again. If this happens, set
the computer resolution again.
If nothing is shown on the TV
y
laptop screen when you press the switch
screen key (Fn + manufacturer-specified
key), try pressing the key again.
The TV screen size may become smaller
y
when you press the switch screen key
(Fn + manufacturer-specified key). If this
happens, adjust the resolution again.
Changing the desktop icon properties
y
in Windows 7 may affect the Pentouch
program.
It is recommended not to run other
y
applications while using the Pentouch
program.
If the point you touch on the TV screen
y
using the touch pen and the point
indicated as touched on the computer
screen do not match when the computer
and TV are connected by a PC signal
(RGB) cable, use the TV remote control
to select [SETTINGS] → [PICTURE]
→ [SCREEN] (RGB), then select [Auto
Configure] to adjust the screen.
If the PC and TV are only connected by
y
a PC (RGB) signal cable, there will be no
sound from the TV. Please connect the
PC and the TV with a PC audio cable as
well.
y
y
y
y
y
y
y
and the
The Play Video function in
not work as intended, depending on the
codecs installed on your computer.
Eraser function could be slower if drawing
objects are overlapped exceed program
performance depends on PC environment.
If you want to open programs with a single
click in Window XP or Vista, On your PC, go
to Start →Control Panel
and select "Single-click to open an item (point
to select)."
If your PC is running Windows XP, the virtual
keyboard will only support English.
When changing to the Pentouch mode, or
when changing the resolution in Pentouch
mode for RGB input signals, images may not
be displayed properly for a while due to auto
adjustment.
Make sure that there are not many metal
obstacles between a pen and dongle. Other-
wise, the function may not work properly.
The Pentouch function may not work nor-
mally where the TV screen is too bright due
to the light from other light source.
45
PENTOUCH
Photo Editor may
→ Folder Options