Using The Pentouch Function; Display Resolution Settings For Pentouch - LG PA45** Owner's Manual

44
PENTOUCH

Using the Pentouch Function

Image shown may differ from your TV.
y
You need the following items to use the Pentouch
functions:
- Computer with RGB or HDMI output
- RGB or HDMI cable
1
After connecting the TV and the PC with an
RGB cable or an HDMI cable, use the INPUT
button on the remote controller and select the
input connected to the PC.
2
Configure your PC screen by referring to the
Display Resolution Setting for Pentouch section.
If your PC is a notebook computer, you should
configure the video to be displayed only on the
TV and not on the PC screen.
3
Enter the Pentouch mode on your TV.
- Press INPUT to access the input sources.
Or press SETTINGS to access the main
menus. Then press the navigation buttons to
scroll to Pentouch and press OK.
4
Select the correct computer input connection to
enter the Pentouch mode.
Select external input connected to PC which installed Pentouch
5
Use the touch pen or the mouse to start the
Pentouch program. Pressing the
button on the touch pen works in the same way
as right-clicking the mouse.
NOTE
If you turn off the TV and turn it back on
y
while using the Pentouch function, the last
screen on which you were working appears.
To switch from Pentouch mode to others
y
mode, either press the INPUT button on the
remote control to select the desired input
or press the TV button to return to the TV
viewing screen.
Display Resolution Settings for
Pentouch
On a Desktop Computer
In Windows XP
Right-click the desktop and select [Properties]. In
the [Display Properties] window, set the screen
resolution to 1024 x 768 under the [Settings] tab.
In Windows Vista
Right-click the desktop and select [Personalize]
and [Display Settings]. Set the screen resolution to
1024 x 768 in the [Resolution] section.
In Windows 7
Right-click the desktop and select [Screen Resolu-
tion]. Set the screen resolution to 1024 x 768 in the
[Resolution] section.
On a Laptop Computer
Method 1:
On your laptop, press the "Fn + switch screen" key
program.
on the keyboard to display the computer screen on
your TV screen, then set the computer's display
resolution to 1024 x 768.
* Note: The switch screen key of the laptop may be
subject to change by the manufacturer.
Touch Home
Method 2:
Open the control panel for the graphics card on
your computer.
Set [Display Mode] to the [Single Display] mode,
then select [LG TV] as the display to use.
* Set the computer's display resolution to
1024 x 768.
LG Samsung
Fn+F7 Fn+F4
Sony Acer
Fn+F7 Fn+ F5
HP Toshiba
Fn+F5 Fn+F5
Dell Lenovo
Fn + F8 Fn + F7