Heating Your Room - Samsung AQ09A1VE Owner's Instructions Manual

Heating Your Room

You must select the Heat mode if you wish to adjust the:
Heating temperature
Fan speed when heating
1 If necessary, press the
Result: The OPERATION indicator on the indoor unit comes on.
The air conditioner starts up in the mode selected when
the unit was last used.
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
IM IMPORTANT
to prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
It will start up normally after a three-minute.
2 If the indication is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result: The indoor unit beeps each time you press
The air conditioner starts up in Heat mode.
N N o o t t e e You can change modes at any time.
N N o o t t e e
3 To adjust the temperature, press the
times until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result: Each time you press
- The temperature is adjusted by 1°C
- The indoor unit beeps
The air conditioner starts heating, provided that the room
temperature is lower than the desired temperature
(selected temperature+3°C); the fan will, however, operate.
4 Select the fan speed by pressing the
until the required setting is displayed:
Low
Medium
High
Automatic
Result: Each time you press
For the first three to five minutes, the fan operates very
slowly until the air has been sufficiently warmed. Once the
correct temperature has been reached, the fan is
automatically set to the required speed.
5 To control the direction of the air flow, refer to page 15.
(On/Off) button.
or buttons one or more
or :
button one or more times
, the indoor unit beeps.
.
11
E-