Basic Functions - Philips 24PW9553/12 User Manual

Date
DAY
17.45 p I 18.00-18.30 π
BBC1 18.00 News
Record
J NED1 18.00 Studio Sport NED1 18.00 Studio Sport
Remind
TF1 18.10 Hit Parade
Watch
ARD 18.15 Nachrichten
Info
RAI1 18.20 Giornale
<<<<<
Info block
Date
DAY
17.45 p I 18.00-18.30 π
record
BBC1 18.00 News
clear
J NED1 18.00 Studio Sport NED1 18.00 Studio Sport
once
TF1 18.10 Hit Parade
daily
ARD 18.15 Nachrichten
weekly
RAI1 18.20 Giornale
<<<<<
Info block
16
time
18.45

Basic functions

The function Watch is only available if a currently broadcasted programme is
selected. Otherwise the function is not available.
The selection causes the TV to tune to the selected channel and
switched off.
When Info is activated, information relating to the selected programme or
advertisements are displayed.
time
18.45
When Record R or Remind ! are activated the screen turns to Record or
Remind mode. This is indicated by a tag-box appearing after the selected
R
programme. The default interval is set to Once. The colour of the tag refers
to the interval.
!
After setting the interval the message Storing appears to indicate the tuner of
the video recorder is programmed.
When watching a certain programme, a message will appear on the screen the
moment the tagged programme with ! starts.
When the TV is in standby, the TV switches on the moment the tagged
programme with ! starts.
In case where a series tag is broadcast the options daily and weekly can be
replaced by the option series. In this case the system identifies when the next
episode of the series will be broadcast.
Acquisition and updating of
Acquisition and updating of
any, is done when the TV is switched to standby after watching the TV.
The TV enters a semi standby mode, the indicator remains green and switches
to full standby automatically after all needed acquisition or updating is
complete, the indicator then turns red. As long as the TV remains in standby,
acquisition will again happen during the night.
Acquisition is however only done if the start of the previous period of semi
standby is 12 or more hours in the past. So, the information acquisition for the
selected provider is done as a maximum twice a day.
Acquisition for non selected providers (selection None in the Setup menu) is
only done while watching the TV channel and when
Note: it may be necessary to put the TV into standby mode when all
information is outdated, e.g. returning from holiday. In this case a message is
displayed.
TV
NEX IEW
TV information for the selected provider, if
NEX IEW
NEX
TV is
NEX IEW
information
TV is not active.
IEW
TV
NEX IEW