Record With Your Video Recorder Without Easylink; Record With A Video Recorder With Easylink - Philips 24PW9553/12 User Manual

24

Record with your video recorder without EasyLink

To record S-VHS quality, connect a S-VHS peripheral directly to the video
recorder.
1. Record a TV programme
using only an aerial cable
•
Select the programme number on your video recorder.
•
Set your video recorder to record.
(See the handbook for your video recorder.)
Switching programme numbers on your TV does not disturb recording !
using a eurocable connected to the
euroconnector
EXTERNAL 2
With a video recorder connected to
possible to record a programme from your TV as
well as from other connected equipment.
•
Select the programme number or external
input on the TV.
•
Select the right external on your video
recorder.
•
Set your video recorder to record.
You record what you are watching on the
screen.
Do not switch programme numbers or do not
switch off your TV when you are recording !
2. Record a programme on your video recorder connected to
EXTERNAL 2
EXTERNAL 3
•
Switch on the equipment.
•
Select the right external on your video recorder.
•
Set your video recorder to record.
You record what you are watching on the screen.
Do not switch programme numbers or do not switch off your TV when you are
recording !

Record with a video recorder with EasyLink

If you have connected a S-VHS video recorder provided with the EasyLink function,
you can record S-VHS-quality from a S-VHS peripheral connected to the right side of
the TV. (E.g. from a S-VHS camcorder.)
In TV mode it is possible to start a direct recording of the programme which is being
displayed on the TV screen.
•
Press at the same time the
control.
The video recorder switches on when it was in standby and a message of what is
being recorded appears at the bottom of the screen.
The video recorder starts recording the programme that appears on the screen.
•
Press the ‡a key to stop the recording.
When recording a programme from a peripheral connected to
FRONT
To watch TV programmes again, press the programme number you want to select
twice . Then the recording is stopped and your video recorder switches to standby.
If you switch to standby during recording a programme from a peripheral connected
to
that you are still recording. The blinking stops after the recording is finished.
it is
EXTERNAL 2
•
•
from Audio/Video equipment connected to
or to the right side
VCR
, you can not select another TV programme on the screen.
or , the blinking red lamp on the front of your TV indicates
EXTERNAL 1 FRONT
using a eurocable connected to the
euroconnector
EXTERNAL 1
With a video recorder connected to
can only record a TV channel.
Select the programme number on the TV.
Set your video recorder to record.
Switching to a programme from a connected
peripheral equipment does not disturb
recording .
key on the left side and the ®M key of the remote
you
EXTERNAL 1
EXTERNAL 1,
or
EXTERNAL 1