Saving Energy; Connecting Additional Equipment; Emergency Interrupt; User Guide - Philips VR285/07 User Manual

Hide thumbs Also See for VR285/07:
Table of Contents

Advertisement

Saving energy

You can choose between two methods of switching to
standby.
Normal method: Switch to standby using the
ton. The clock time remains displayed. If the clock has not
been set, '--:--' appears in the display.
To save energy: Press the
time disappears from the display.

Connecting additional equipment

You can also connect additional equipment to the
et. For instance: satellite receiver, decoder or camcorder.

Emergency interrupt

Both the video recorder and the remote control have an
'Emergency interrupt' button. You can use
the
button to interrupt any function.
STANDBY m
Whenever you have operating problems you can simply
interrupt the function and start again.
You can practise operating your set without any worries. No
matter which buttons you press, you cannot damage it.
4
STANDBY m
button twice. The clock
STANDBY m
EXT.2

User guide

With OSD (On Screen Display) the corresponding functions
appear on the TV screen. The most important button-functions
are displayed at the bottom of the screen. For instance:
but-
Throughout this instruction manual, use the following buttons
sock-
for these functions: 'Select', 'Enter'/'Adjust', 'Confirm'.
Select: Use the
P r
Enter/Adjust: Use the
buttons.
Confirm: Use the

Autoinstall

The video recorder will search for all TV channels. It stores TV
channels found in the following sequence: BBC 1, BBC 2, ITV,
CH 4, CH 5, SKY, others.
1
Switch on the TV set. Press the
the video recorder. If TV channels have already been
stored, select the line 'AUTOINSTALL', using the
button.
P r
2
Confirm with the
'AUTOINSTALL' starts. On the TV screen appears:
Wait until all TV channels have been found. This can take
several minutes.
3
When 'AUTOINSTALL' is complete, 'READY' will appear in
the display. Date and clock information have been set.
DATE PROG START V/P END
01
01
20:00
21:30
------------------------
gTIMER CLEAR
gCL
NEXT
-/+
0-9
D/WgSELECT
OK
or the
P q
button.
or the
button, or the
P r
P q
button.
OK
AUTOINSTALL
button.
OK
AUTOINSTALL
00
0-9
button on
P q
or

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr 285

Table of Contents