Samsung MD40B User Manual page 128

7
Network
If you want to set up the connection manually, select

section, "How to set up manually".
Manual Network Setup
Use the Manual
address or if the automatic connection process has failed.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps:
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
To set up your product cable network connection manually, follow these steps:
1
Go to the Network Settings
2
Select Wireless
3
The Network
available networks.
4
In the list of networks, press the
twice.
If the wireless router is set to Hidden (Invisible), you have to select
correct
5
If the Enter security key screen appears, go to step 6. If you selected an wireless router that does not
have security, go to step 8.
6
Enter the Security key (Security key
When you enter the

remote to select number/characters. Press [
You can also enter numbers by pressing the number buttons on your remote.

You should be able to find the Pass Phrase on one of the set up screens you used to set up

your router or modem.
7
When done, use the
8
The network connection screen appears and the verification process starts. Press [
Select IP Settings
9
Select the field on the top, press [
10
Press the
Network Setup when connecting your product to a network that requires a Static IP
screen.
(General), press [ ], and then press [
function searches for available wireless networks. When done, it displays a list of the
or
Network Name (SSID) and
Security key (Security key
button to move the cursor to Next, and then press the [
on the network connection screen. The
], and then set
button on your remote to go to the
IP
] again.
button to select a network, and then press the [
Security key to establish the connection.
or PIN).
or PIN), use the
] to enter the characters.
IP Settings
IP Mode to Manual.
IP Address entry field, and then press [
Settings. Then, go to the next
Add Network and enter the
/ / / buttons on your
] button.
] to cancel.
screen appears.
7 Network
] button
].
128