Samsung MD40B User Manual page 125

7
Network
If the automatic process cannot find the network connection values or if you want to set the

connection manually, go to the next secton,
Manual Network Setup
Use the Manual Network Setup when connecting your product to a network that requires a Static IP
address.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
To set up your product cable network connection manually, follow these steps.
1
Go to the Network Settings
2
Select Wired, press [
verification process starts.
3
Press [ ]. The verification process stops. Select
IP Settings
4
Select the field at the top, press [
5
Press the
6
Enter the first portion of the
keys on your remote. Press the right arrow button to go to the next field.
7
Enter the next portion of the
8
Repeat the entry process for each field in the
If you make a mistake when entering a number, re-enter the number to correct it. You can also
press the up or down arrow button to change the number one unit at a time.
9
When done entering the
10
Press the down arrow key to go to the
11
Repeat the same entry process for
12
When done, select
appears and the verification process starts. When the connection has been verified, the "Internet is
connected successfully." message appears.
screen.
], and then press [
screen appears.
], and then set
button on your remote to go to the IP Address entry field, and then press [
IP Address
IP Address. Press the right arrow button to go to the next field.
IP Address, press [
Subnet
OK at the bottom of the page, and then press [
Manual Network
] again. The network test screen appears and the
IP Settings on network connection screen. The
IP Mode to Manual.
into the first entry field using the number
IP Address.
].
Subnet Mask fields, and then press [
Mask, Gateway, and
Setup.
].
].
DNS Server.
]. The network test screen
7 Network
125