Network; Network Settings; Connecting To A Wired Network - Samsung MD40B User Manual

7

Network

7.1

Network Settings

7.1.1 Connecting to a Wired Network

There are three ways to attach your product to your LAN using cable.
You can attach your product to your LAN by connecting the LAN port on the back of your product to

an external modem using a LAN cable. See the diagram below.
The Modem Port on the Wall
You can attach your product to your LAN by connecting the LAN port on the back of your product to

an IP Sharer which is connected to an external modem. Use LAN cable for the connection. See the
diagram below.
The Modem Port on the Wall
Depending on how your network is configured, you may be able to attach your product to your LAN

by connecting the LAN port on the back of your product directly to a network wall outlet using a LAN
cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere
in your house.
The LAN Port on the Wall
If you have a Dynamic Network, you should use an ADSL modem or router that supports the

Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS values your product needs to
External Modem
(ADSL / VDSL)
Modem Cable
External Modem
(ADSL / VDSL)
Modem Cable LAN Cable
LAN Cable
LAN Cable
IP Sharer
(having DHCP server)
LAN Cable
LAN
RJ45
LAN
RJ45
LAN
RJ45
123
7 Network