Samsung SGH-E790 Service Manual page 13

5
1) Attach Screw rubber caps on the screws
by using a pincette.
※ caution
1) Be careful not to make scratch and molding
damage!
2) Be sure to push the rubbers.
7
1) Insert the KEYPAD.
※ caution
1) Be careful not to insert keypad into FRONT
incorrectly![Put KEYPAD Holes into FRONT
Projection correctly!]
2) Be careful not to damage LCD FPCB!
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Insert LCD FPCB[which is connected to
FOLDER] into the bottom of FRONT Hinge.
2) The FOLDER's projection inserts the
FRONT'S hole when Projection is pushed
3) Assemble FOLDER with FRONT
※ caution
1) Be careful not to make scratch and molding
damage!
8
Attach FRONT Dust
1) Attach FRONT Dust TAPE as a above
picture is shown.
※ caution
1) Be careful not to make scratch and molding
damage!
2-7
Exploded View and Parts List
TAPE