Assembly - Samsung SGH-E790 Service Manual

Exploded View and Parts List

2-4. AssemblY

1
1) Solder SPEAKER & MOTOR to LCD.
2) Bond on the soldering place
※ caution
1) Be careful not to make scratch and molding damage!
3
<1>
1) Assemble FOLDER UPPER with FOLDER LOWER
following the orders as above picture is
shown.
※ caution
1) Be careful not to make scratch and molding damage!
<3>
<2>
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
Arrange Wires clearly on
SPEAKER and MOTOR !
1) Insert FPCB into FOLDER LOWER.
2) Attach Speaker and Motor.
※ caution
1) Be careful not to make scratch and molding damage!
2) Be careful not to damage LCD FPCB!
4
1) Screw up the FOLDER UPPER at the above
two points.(M1.4xL3)
※ caution
1) Be careful not to make scratch and molding damage!
1.1 ~ 1.3 kgf.cm
2) Torque
2-6