Samsung SGH-E790 Service Manual page 14

Exploded View and Parts List
9
1) Insert PBA into FRONT.
2) Connect LCD FPCB to PBA CONNECTOR.
※ caution
1) Be careful not to damage LCD FPCB!
2) Be careful not to damage PBA
11
1) Assemble the rear from 1 direction to 2
direction as the above picture is shown.
※ caution
1) Be careful not to make scratch and molding
damage!
1
2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
10
1) Insult the Side key and Camera key as
the above picture is shown.
※ caution
1) Be sure the direction of side key
12
1) Screw up the REAR at 4 Points.
[M1.4* L3]
※ caution
1) Torque 0.8 ± 0.1 Kgf/ ㎠
2) Be careful not to make scratch and molding
damage!
2-8
Be sure the direction.