Disassembly - Samsung SGH-E790 Service Manual

Exploded View and Parts List

2-3. Disassembly

1
1) Unscrew the REAR at the four points.
2) Disassemble the IF COVER
※ caution
1) Be careful not to make scratch and molding
damage!
3
1) Disassemble the LCD CONNECTOR
2) Disassemble the PBA from the FRONT ASS'Y
3) Remove the DUST TAPE
4) Disassemble the Keypad.
※ caution
1) When PBA is separated from LCD Connector,
Be careful not to damage!
2) Be careful not to damage LCD FPCB!
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
PULL OUT
"FRONT
CASE"
1) Disassemble the Rear from the bottom side
to the upper side.
※ caution
1) Be careful not to make scratch and molding
damage!
4
1) Push the hinge between Folder Upper and lower,
And Disassemble Front from Folder.
※ caution
1) Be careful not to make scratch and molding
damage!
2) Be careful not to damage LCD FPCB!
2-4
PULL OUT
"FRONT
CASE"