User Eq; Audio Return Ch; System; Initial Settings - Samsung HT-D450 User Manual

Setup
✎
NOTE
`
The default setting of this function is HDMI Audio Off.
`
HDMI Audio is automatically down-mixed to 2ch for
TV speakers.
`
When HDMI Audio is set to On, PL II /DSP EQ
/P.BASS doesn't work.
`
With HDMI AUDIO set to 'On', the volume can be
adjusted only using the TV remote control.

User EQ

You can configure the equalizer settings manually to
your preference.
Settings
User EQ
dB
6
·
·
·
·
·
·
·
·
·
·
·
·
-6
250Hz 600Hz 1kHz
a Reset > Adjust < Move ' Return
✎
NOTE
`
This can be also done using the DSP/EQ button.
(see page 34)

Audio Return Ch.

You can enjoy TV sound from the Home Cinema
speakers by using just one HDMI cable.
Off : Turn the Audio Return Channel function off.
•
• Auto : Listen to TV sound from the Home Cinema
speakers if your TV is compatible with the Audio
Return Channel function.
NOTE
✎
`
When Anynet+ (HDMI-CEC) is Off, the Audio
Return Channel function is not available.
`
Using an ARC (Audio Return Channel)-
uncertified HDMI cable may cause a problem in
compatibility.
`
ARC function is only available if an ARC-
compliant TV is connected.
26
English
3kHz 6kHz 10kHz 15kHz
mMove " Select ' Return

System

Initial Settings

By using the Initial Settings, you can set the language
and TV aspect.
✎
NOTE
`
If the HDMI cable is connected to the product,
TV aspect does not appear and it is set to 16:9
Wide automatically.

DivX(R) Registration

View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.
NOTE
✎
`
This option is not activated if you select OK.To
activate this option, please activate the DivX(R)
Deactivation.
`
Even after you reset the system, the settings of
DivX Registration will not be reset.

DivX(R) Deactivation

Select this to get a new registration code.