Samsung SyncMaster TC220W User Manual page 22

1
Preparations
Icons
AUTO
(Power lamp)
Speaker
OSD Guide
When OSD is not on the screen, push the button to adjust volume.
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will
change the input source (Digital/Analog). If you power on the product or
change the input source by pressing the [
that shows the changed input source will appear at the top left corner of
the screen.
Press the [ ] button to automatically adjust the screen settings.
AUTO
Available only in

Changing the resolution in Display Properties will activate the

Auto Adjustment
Use this button for turning the Display on and off.
The power indicator will be lit when the product is operating normally.
Refer to "11.2 PowerSaver" for details about the power-saving

function.
To reduce power consumption. it is best to remove the power

cable when you will not be using the product for an extended
period of time.
If the 11th digit of the model code is M, the model has internal
speakers.
E.g,) LF22NEBHBNMEN
Press one of the buttons on the monitor, OSD Guide will appear on the
screen.
If you press a button on the front of the monitor, an OSD Guide will
display showing the function of the button before the menu for the
pressed button appears.
To go to the menu, press the button on the front of the monitor again.
OSD Guide may vary according to functions and models. Please refer to
actual product.
Description
] button, a message
Analog mode.
function.
1 Preparations
22