WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for easy
and secure wireless network set up and connections. To use WPS,
the connecting device must support WPS and be compatible with
Wi-Fi Protected Access (WPA) security. WPS can automatically
set up a random network name and WPA wireless security for
wireless Wi-Fi phones, routers, access points, computers,
adapters, and other electronic devices.
WPS allows you to push buttons instead of entering a network
name and wireless security PIN.
Press
1.
➔
Wireless and network
Tap WPS button connection.
2.
Press the WPS button on your Wi-Fi access point within
3.
2 minutes.
Manually Adding a Wi-Fi Network
Press
1.
➔
Wireless and network
Tap Wi-Fi to turn it on.
2.
Tap Add Wi-Fi network.
3.
and then tap
(Settings)
Wi-Fi settings.
➔
and then tap
(Settings)
Wi-Fi settings.
➔
Enter the SSID (Service Set Identifier) and Security settings
4.
then tap Save.
Note: An SSID is a unique key which identifies a wireless LAN. Its purpose is
to stop other wireless equipment from accessing your LAN — whether
accidentally or intentionally. To communicate, wireless devices must be
configured with the same SSID.
Bluetooth Settings
In this menu you can activate Bluetooth, view or assign a device
name, activate your phone so other Bluetooth devices can
discover it, or scan for other, available Bluetooth devices with
➔
which to pair.
Activating Bluetooth
Press
Wireless and network
Bluetooth to turn it on.
Note: Bluetooth must be enabled prior to use.
➔
Activating the Device Name
Press
1.
Wireless and network
The assigned device name displays.
and then tap
➔
Bluetooth settings and tap
➔
and then tap
➔
Bluetooth settings
➔
Changing Your Settings
(Settings)
➔
(Settings)
➔
Device name.
➔
157