Table of Contents
Advertisement
Manually Add a New Network Connection
Tap Add Wi-Fi network.
1.
Enter the Network SSID (the name of your Wireless Access
2.
Point).
Tap the Security field and select a security option. This must
3.
match the current security setting on your target WAP.
Enter your WAP's password if the WAP is secure.
4.
Tap Save to store the new information and connect to the
5.
target WAP.
Note: No prompt to enter the WAP key displays if this is the second time to
connect to a previously accessed or secured wireless network. The
WAP key is required when the device is reset using factory default
settings.
Deactivating Wi-Fi
Press
1.
➔
Wireless and network
Tap the Wi-Fi field to deactivate the feature. The checkmark
2.
grays.
148
and then tap
(Settings)
Wi-Fi settings.
➔
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
reduce battery life and use times.
Manually Scan for a Wi-Fi Network
Press
1.
Wireless and network
Press
2.
Wi-Fi Status Indicators
The following icons indicate the Wi-Fi connection status:
The Wi-Fi settings - Advanced menu allows you to set up many of
➔
the device's Wi-Fi services, including:
Setting the Wi-Fi sleep policy
•
Viewing the device's MAC Address
•
Configuring use of either a DHCP or Static P
•
and then tap
➔
Wi-Fi settings.
➔
and then tap Scan.
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active and there is an available
open wireless network.
Wi-Fi Advanced Settings
(Settings)
➔
Advertisement
Table of Contents
