Disconnect from a Bluetooth Device
1. Press
and then touch
2. Touch OFF/ON to turn Bluetooth on, then touch Bluetooth.
3. In the Available devices section, touch
4. Touch OK.
Unpair from a Bluetooth Device
You can make your device forget its pairing connection with another Bluetooth device. To connect to
the other device again, you may need to enter or confirm a passcode again.
1. Press
and then touch
2. Touch OFF/ON to turn Bluetooth on, then touch Bluetooth.
3. In the Available devices section, touch
Bluetooth Settings
For information about configuring Bluetooth settings, see Bluetooth Settings.
Virtual Private Networks (VPN)
From your phone, you can add, set up, and manage virtual private networks (VPNs) that allow you
to connect and access resources inside a secured local network, such as your corporate network.
Prepare Your Phone for VPN Connection
Depending on the type of VPN, you may be required to enter your login credentials or install security
certificates before you can connect to your company's local network. You can get this information
from your network administrator.
To connect to a VPN, you must have Mobile data enabled, or your phone must be connected to a
Wi-Fi network. For information about setting up and using these connections on your phone, see
Mobile networks and Turn Wi-Fi On and Connect to a Wireless Network.
Set a Screen Lock
Before setting up a VPN, you must set a screen lock to prevent access to your phone by
unauthorized users. Pattern, PIN, or password screen locks provide sufficient security to set up
trusted credential storage.
1. Press
and touch
2. Touch Lock screen > S creen lock.
3. Choose a screen lock: P attern, PIN, or Password.
Web and Data
> S ettings > C onnections tab.
next to the device, and then select Disconnect.
> S ettings > C onnections tab.
next to the device, and then select Unpair.
> S ettings > My device tab.
73