Cookpot, Rinse Tank And Associated Components - Frymaster GBC Service And Parts Manual

2.7 Cookpot, Rinse Tank, and Associated Components
2.7.1 Cookpot and Rinse Tank Components (Other than Cookpot Insulation)
3
ITEM PART #
1 823-4090SP
2 806-5497SP
3 823-1994SP
* 106-2797SP
* 106-2798SP
* 106-3055SP
* 106-3056SP
4 823-2022
5 823-2791
6 816-0160
7
806-9365SP
806-9366SP
106-3084SP
826-1082
826-1081
* 810-1212
8 810-1697
9 823-1920
10 823-1921
11 806-4764
12 809-0357
13 910-1804
14 826-1376
15 826-1337
16 809-0193
17 810-0976
* Not illustrated.
5
4
6
2
Cookpot, GSMS (Use 823-4227SP for units with manual fill. See NOTE be-
low.)
Flue Assembly, GSMS (See NOTE below.)
Tank, GSMS Rinse
Complete Burner, Frypot, Flue Auto Fill assembly, NAT
Complete Burner, Frypot, Flue Auto Fill assembly, PRO
Complete Burner, Frypot, Flue Manual Fill assembly, NAT
Complete Burner, Frypot, Flue Manual Fill assembly, PRO
Strainer Assembly
Cover, Probe Block (angled top) (for flat-topped block, use 823-1942)
Insulator, 5.25-inch x 5.00 Probe Cover
Probe Block Assembly, Complete
Angled top, for use on units without Autofill option.
Angled top, for use on units with Autofill option.
Angled top, for use on units with manual fill.
Flat top w/pins, for use on units without Autofill option.
Flat top w/pins, for use on units with Autofill option.
Replacement Pin, for use w/flat-topped probe blocks.
Block, Probe (angled top) (for flat-topped block, use 810-0821)
Sensor, Low Water Level (806-9365SP and 826-1082 use two each)
Sensor, Normal Water Level (used in 806-9366SP and 826-1081)
Probe Assembly, Temperature
Screw, #6 x ⅜-inch Philips Truss Head Nickel Plated
Bracket, Probe Retainer
Nut, 10-32 Keps Hex Head (Pkg. of 10)
Tab, Faston .25-inch (Pkg. of 5)
Washer, ¼-inch Nylon Flat
Nozzle, Water Inlet
2-13
16
15
14
17
8
9 12
11 13
1
10 12
COMPONENT
12
7
12