Nam Programming - Samsung SCH-A105 Service Manual

4. NAM Programming

NAM features can be programmed as follows:
Notes:
- If you enter the NAM program mode, each item shows the currenly stored data. Go to the next item by
pressing OK/ .
- You can modify the data by entering a new data.
- If you enter a wrong digit, press CLR to delete the last digit. Press and hold CLR to delete all digits.
- To scroll items backwards or forwards, press the VOLUME button on the left side of the phone.
4-1 General Setup
LCD Display
47 869#08#9
NAM program
1:General
2:Setup NAM1
3:Setup NAM2
ESN
B0000000
CAI version
3
VOC8/13/EVRC
SO_VOIC_13K
SCM
01101010
Lock Code
0000
Slot Mode
Yes
Slot Index
2
Pref NAM1...
Digital pref
Pref NAM2...
Digital pref
Key in
47 869#08#9
1
Volume
Volume
Volume
Volume
(0000)
4-digit code
OK/
<or>
OK/
0-7
OK/
OK/
OK/
SAMSUNG Proprietary-Contents may change without notice
-selects NAM programming
-choose 'GENERAL'
-Electronic Serial Number of the phone
-The version of Common Air Interface supported by
the mobile
-evrc, voice08k, voice13k
-Station Class Mark displays the power class(bit0~1),
transmission(bit2), slotted class(bit5), dual mode(bit6).
-Lock code, current ststus is displayed
to change, enter new code.
-stores it
-Slot mode. 'Yes' indicates the slot mode.
changes the status.
-stores it.
-Slot mode index. The higher, the longer sleeping time
to change, enter new one.
-stores it.
-Preferred system selection for NAM1
changes the system.
-stores it.
-Preferred system selection for NAM2
changes the system.
-stores it.
4-1
Function