Honda 2010 Insight Owner's Manual page 67

Instrument Panel Indicators
U.S. Canada Brake System
Indicator
(Amber)
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and START (III) position.
When the brake system indicator
(amber) comes on and stays on,
there is a problem with the Creep
Aid System or Brake Assist (the
normal brake operates properly).
Have your vehicle checked by your
dealer. For more information, see
page 324 .
You will also see a ''CHECK BRAKE
SYSTEM'' message on the multi-
information display (see page
64
Anti-lock Brake System
(ABS) Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and when the ignition
switch is turned to the START (III)
position. If this indicator comes on at
any other time, there is a problem in
the ABS. If this happens, take the
vehicle to your dealer to have it
checked. With this indicator on, your
vehicle still has normal braking
ability but no anti-lock function. You
will also see a ''CHECK ABS
SYSTEM'' message on the multi-
information display. For more
information, see page
89 ).
2010 Insight
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. If it comes on at
any other time, it indicates a
potential problem with your front
airbags. This indicator will also alert
you to a potential problem with your
side airbags, passenger's side airbag
cutoff system, side curtain airbags,
automatic seat belt tensioners,
driver's seat position sensor, or the
front passenger's weight sensors.
You will also see a ''CHECK
AIRBAG SYSTEM'' message on the
multi-information display. For more
326 . information, see page
Supplemental Restraint
System Indicator
34 .