Honda 2010 Insight Owner's Manual page 66

12 Volt Battery Charging
System Indicator
If this indicator comes on when the
engine is running, the 12 volt battery
is not being charged, and you will
also see a ''CHECK CHARGING
SYSTEM'' message on the multi-
information display. For more
information, see page 402
Immobilizer System
Indicator
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. It will then go off if
you have inserted a properly coded
ignition key. If it is not a properly
coded key, the indicator will blink,
and the engine's fuel system will be
disabled (see page 126 ).
U.S. Canada
This indicator has two functions:
1. It comes on when you turn the
ignition switch to the ON (II)
. position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the brakes
and tires.
If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ''RELEASE
PARKING BRAKE'' message on
the multi-information display (see
page 148
2010 Insight
Parking Brake and
Brake System
Indicator (Red)
).
Instrument Panel Indicators
2. If it stays on after you have fully
released the parking brake while
the engine is running, or if it
comes on while driving, it can
indicate a problem in the brake
system. You will also see a
''BRAKE FLUID LOW'' or
''CHECK BRAKE SYSTEM''
message on the multi-information
display. For more information, see
page 404 .
63