With A Tether - Honda 2011 CIVIC COUPE Owner's Manual

Installing a Child Seat
Installing a Child Seat with a
Tether
TETHER ANCHORAGE POINTS
ANCHOR
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
46
Using an Outer Anchor
COVER
Unlock the seat-back from inside
1.
the trunk by pulling the release
(see page
forward slightly to make a space
between the rear window and the
head restraint.
2. Remove the head restraint (see
page 99 ). Make sure the removed
head restraint is stored in the
trunk. Reinstall the head restraint
when the child seat is removed.
102 ), then fold it
3. Lock the seat-back upright by
pushing it firmly against the trunk
panel.
After properly securing the child
4.
seat (see page ), route the
44
tether strap over the seat-back.