With Latch - Honda 2011 CIVIC COUPE Owner's Manual

Installing a Child Seat
Installing a Child Seat with
LATCH
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for CHildren) at the outer
rear seats.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
The location of each lower anchor is
indicated by a small button above the
anchor point.
To install a LATCH-compatible child
seat:
1. Move the seat belt buckle or
tongue away from the lower
anchors.
42
LOWER ANCHORS
Make sure there are no objects
2.
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
3. Unlock the seat-back from inside
the trunk by pulling the release
(see page 102 ), then fold it
forward slightly to make a space
between the rear window and the
head restraint.
BUTTONS
4. Remove the head restraint (see
page
head restraint is stored in the
trunk. Reinstall the head restraint
when the child seat is removed.
5. Lock the seat-back upright by
pushing it firmly against the trunk
panel.
99 ). Make sure the removed