Honda 2011 CIVIC COUPE Owner's Manual page 133

Preset Each side of the buttons
(1 through 6) can store one
frequency on AM, and two
frequencies on FM.
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
2. Use the tune, seek, or scan
function to tune the radio to a
desired station.
3. Pick a preset number (1 6), and
hold it until you hear a beep.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
Playing the AM/FM Radio (Models without navigation system)
AUTO SELECT
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Press the A. SEL button. You will see
A. SEL flashing in the display, and
the system goes into scan mode for
several seconds. It stores the
frequencies of six AM, and twelve
FM stations in the preset buttons.
You will see a ''0'' displayed after
pressing a preset button if auto
select cannot find a strong station for
every preset button.
If you are If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described.
To turn off auto select
A. SEL (auto select) button. This
restores the presets you originally
set.
For information on AM/FM radio
frequencies and reception, see page
214 .
, press the
127