Haier HDY-D60 Owner's Manual page 6

1. Power up
Insert the power plug into an appropriate power outlet that is properly installed and
grounded. Operating power supply: 220-240V~50Hz.
2. Laundry loading
Open the door and load the laundry into the drum of the dryer. For a more energy
efficient and better drying result, make sure the load has been spun dry. Try to
loosen the load when placing in the dryer.
Note:
Check labels on clothing before placing them in the dryer. Some articles are not
suitable for machine dry. High temperature may damage the fabric.
3.Setting drying time
Turn the program knob to set your desired drying program.
4. Program operation
After a program is set, gently touch the "START/PAUSE" button to start the program.
5. Program completion
After the program is complete, the dryer will stop tumbling and the indicator light
will be blinking. Open the door and remove the laundry.
If the laundry is not removed, the dryer will automatically commence an "anti-crease"
protection cycle to keep your laundry from settling in one position and creasing. This
cycle will last an hour unless stopped. The light will blink and the dryer will run with
cool air at set intervals. To stop the anti-crease cycle press the start pause button,
empty the dryer and turn off as shown below.
6. Turning off the dryer
Turn the program knob to the "OFF" position and turn the power off at the wall.
Note:
Clean the filter after each load.
May be tumble dry .
Do not tumble dry .
Normal dry .
Air dry, only .
5