Table of Contents
Advertisement
6. Tilt the tire toward the vehicle
with some slack in the cable to
allow access to the tire/wheel
retainer.
Tilt the retainer and pull it
through the center of the wheel
along with the cable and spring.
7. Put the spare tire near the
flat tire.
Use the following pictures and
instructions to remove the flat tire
and raise the vehicle.
A. Jack
B. Wheel Blocks
C. Jack Handle
D. Jack Handle Extension
E. Wheel Wrench
The tools you will be using include
the jack (A), the wheel blocks (B),
the jack handle (C), the jack handle
extensions (D), and the wheel
wrench (E).
1. Do a safety check before
proceeding. See
for more
information.
2. Remove the center cap by
placing the chisel end of the
wheel wrench in the slot on the
wheel and gently prying the
cap out.
Advertisement
Table of Contents
