1. Manuals
  2. Brands
  3. GMC Manuals
  4. Automobile
  5. Sierra 3500HD 2001
  6. Owner's manual

GMC Sierra 3500HD 2001 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for GMC Sierra 3500HD 2001

Summary of Contents for GMC Sierra 3500HD 2001

  • Page 3 2001 GMC Sierra 3500HD Owner's Manual Litho in U.S.A. © Copyright General Motors Corporation 2000 Part Number X2104 A First Edition All Rights Reserved...
  • Page 4 Table of Contents Seats and Restraint Systems Seats and Seat Controls Restraint Systems for Children Section Safety Belts Features and Controls Windows Windshield Wipers Section Keys and Door Locks Cruise Control Keyless Entry System Exterior and Interior Lamps Automatic Transmission Mirrors Manual Transmission Storage Compartments...
  • Page 5 Comfort Controls and Audio Systems Heating and Air Conditioning Radio/Cassette Player Section Setting the Radio Clock Your Driving and the Road Defensive Driving Driving Tips for Various Road Conditions Section Drunken Driving Recreational Vehicle Towing Control of a Vehicle Loading Your Vehicle Braking Towing a Trailer Steering...
  • Page 6 Table of Contents (cont'd) Service and Appearance Care Fuel Tires and Wheels Section Checking Fluids and Lubricants Appearance Care Engine Air Cleaner/Filter Electrical System/Fuses and Circuit Breakers Brakes Capacities and Specifications Bulb Replacement Normal Maintenance Replacement Parts Windshield Wiper Blade Replacement Maintenance Schedule Section Scheduled Maintenance...
  • Page 7 Table of Contents (cont'd) Customer Assistance Information Customer Satisfaction Procedures Warranty Information (See Warranty Manual) Section Customer Assistance Offices Reporting Safety Defects on page 8-10 Roadside Assistance and Courtesy Transportation Service Publications Index In the Index you will find an alphabetical listing of almost every subject in this manual. Section You can use it to quickly find something you want to read.
  • Page 8 For vehicles first sold in French Language Manual: Canada, substitute the name “General Motors of Canada Limited” for GMC whenever it appears in this manual. Aux propriétaires canadiens: Vous pouvez vous Please keep this manual in your vehicle, so it will be procurer un exemplaire de ce guide en français chez...

  • Page 9: How To Use This Manual

    How to Use this Manual Safety Warnings and Symbols Many people read their owner’s manual from beginning You will find a number of safety cautions in this book. to end when they first receive their new vehicle. If you We use a box and the word CAUTION to tell you do this, it will help you learn about the features and about things that could hurt you if you were to ignore controls for your vehicle.

  • Page 10: Vehicle Damage Warnings

    You will also find a circle In the notice area, we tell you about something that can with a slash through it in damage your vehicle. Many times, this damage would this book. This safety not be covered by your warranty, and it could be costly. symbol means “Don’t,”...

  • Page 11: Vehicle Symbols

    Vehicle Symbols These are some of the symbols you may find on your vehicle. Also see “Warning Lights and Gages” in the Index. For example, These symbols These symbols These symbols These symbols Here are some these symbols are important for have to do with are on some of are used on...

  • Page 12: Model Reference

    Model Reference This manual covers this model: 3500HD Chassis Cab...
  • Page 13 Service Station Guide Battery Tire Pressure Cooling System See Section 6* See Section 6 a More See Section 5* Detailed Look at What's Under the Hood See Section 6* Spare Tire Pressure See Section 6 Hood Release See Section 6 Engine Oil Dipstick Fuel See Section 6*...

  • Page 14: Table Of Contents

    Section 1 Seats and Restraint Systems Here you’ll find information about the seats in your vehicle and how to use your safety belts properly. You can also learn about some things you should not do with safety belts. Seats and Seat Controls Center Passenger Position Safety Belts: They’re for Everyone Children...

  • Page 15: Seats And Seat Controls

    Seats and Seat Controls You can adjust the seat with this lever located at This section tells you about the seats how to adjust the front of the seat. them, and fold them up and down. It also tells you about reclining front seatbacks and head restraints.

  • Page 16: Reclining Seatbacks

    Power Lumbar Control (If Equipped) Reclining Seatbacks If you have power lumbar adjustment, you can increase or decrease lumbar support in an area of the lower seatback. To increase support, press and hold the front of the rocker switch. Let go of the switch when the lower To adjust the front seatback, move the lever rearward.
  • Page 17 CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job because it won’t be against your body.

  • Page 18: Head Restraints

    Head Restraints Seatback Latches The front seatback folds forward to let you access the rear of the cab. To fold the seatback, pull the easy entry lever located on the outboard side of the seat. To return the seatback to the upright position, push the seatback rearward until it latches.

  • Page 19: Safety Belts: They're For Everyone

    Safety Belts: They’re for Everyone CAUTION: This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.

  • Page 20: Why Safety Belts Work

    In most states and Canadian provinces, the law says to Why Safety Belts Work wear safety belts. Here’s why: They work. When you ride in or on anything, you go as fast as it goes. You never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be a bad one.
  • Page 21 Put someone on it. Get it up to speed. Then stop the vehicle. The rider doesn’t stop.
  • Page 22 The person keeps going until stopped by something. or the instrument panel ... In a real vehicle, it could be the windshield ...

  • Page 23: Here Are Questions Many People Ask

    Here Are Questions Many People Ask About Safety Belts and the Answers Won’t I be trapped in the vehicle after an accident if I’m wearing a safety belt? You could be whether you’re wearing a safety belt or not. But you can unbuckle a safety belt, even if you’re upside down.

  • Page 24: How To Wear Safety Belts Properly

    If I’m a good driver, and I never drive far from How to Wear Safety Belts Properly home, why should I wear safety belts? Adults You may be an excellent driver, but if you’re in an This part is only for people of adult size. accident even one that isn’t your fault Be aware that there are special things to know about...
  • Page 25 3. Pick up the latch plate and pull the belt across you. The lap part of the belt should be worn low and snug on Don’t let it get twisted. the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones.
  • Page 26 Shoulder Belt Height Adjuster To move it down, push in at the word PRESS and move the height adjuster to the desired position. You can move Before you begin to drive, move the shoulder belt the adjuster up just by pushing up on the shoulder belt adjuster to the height that is right for you.
  • Page 27 What’s wrong with this? CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. The shoulder belt is too loose. It won’t give nearly as much protection this way.
  • Page 28 What’s wrong with this? CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries.
  • Page 29 What’s wrong with this? CAUTION: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied at the abdomen, not at the pelvic bones, and that could cause serious or fatal injuries.
  • Page 30 What’s wrong with this? CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which aren’t as strong as shoulder bones.
  • Page 31 What’s wrong with this? CAUTION: You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it.

  • Page 32: Safety Belt Use During Pregnancy

    Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they don’t wear safety belts. To unlatch the belt, just push the button on the buckle. The belt should go back out of the way.

  • Page 33: Lap Belt

    The best way to protect the fetus is to protect the Lap Belt mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.

  • Page 34: Children

    Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
  • Page 35 CAUTION: (Continued) For example, in a crash at only 25 mph (40 km/h), a 12 lb. (5.5 kg) baby will suddenly become a lb. (110 kg) force on a person’s arms. A baby should be secured in an appropriate restraint. CAUTION: People should never hold a baby in their arms while riding in a vehicle.
  • Page 36 What are the different types of add child restraints? CAUTION: on child restraints, which are purchased by the vehicle’s owner, are available in four basic types. Newborn infants need complete support, Selection of a particular restraint should take into including support for the head and neck. This is necessary because a newborn infant’s consideration not only the child’s weight, height neck is weak and its head weighs so much...

  • Page 37: Restraint Systems For Children

    Restraint Systems for Children CAUTION: The body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that vehicle’s regular safety belt may not remain low on the hip bones, as it should.
  • Page 38 A rear facing infant seat (B) provides restraint with A forward facing child seat (C E) provides restraint for the seating surface against the back of the infant. the child’s body with the harness and also sometimes The harness system holds the infant in place and, in a with surfaces such as T shaped or shelf like shields.
  • Page 39 How do child restraints work? A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built in child restraint system is a permanent part of the motor vehicle. An add child restraint system is a portable one, which is purchased by the vehicle’s owner.

  • Page 40: Where To Put The Restraint

    When choosing a child restraint, be sure the child Where to Put the Restraint restraint is designed to be used in a vehicle. If it is, The child restraint must be secured properly in the it will have a label saying that it meets federal motor center or right front passenger seat.
  • Page 41 If you need to have an anchor installed, your dealer can obtain a kit with anchor hardware and installation instructions specifically designed for this vehicle. The dealer can then install the anchor for you. This work will be done for you free of charge. Or, you may install the anchor yourself using the instructions provided in the kit.
  • Page 42 1. Make the belt as long as possible by tilting the latch 4. Buckle the belt. Make sure the release button is plate and pulling it along the belt. positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 2.

  • Page 43: Front Seat Position

    5. To tighten the belt, pull its free end while you Securing a Child Restraint in the Right push down on the child restraint. If you’re using Front Seat Position a forward facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
  • Page 44 3. Buckle the belt. Make sure the release button is 4. Pull the rest of the lap belt all the way out of the positioned so you would be able to unbuckle the retractor to set the lock. safety belt quickly if you ever had to. 1-31...
  • Page 45 5. To tighten the belt, feed the lap belt back into the retractor while you push down on the child restraint. If you’re using a forward facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt.

  • Page 46: Older Children

    Older Children What is the proper way to wear safety belts? If possible, an older child should wear a shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs.
  • Page 47 CAUTION: Never do this. Here two children are wearing the same belt. The belt can’t properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time. What if a child is wearing a lap shoulder belt, but the child is so small that the shoulder belt is...
  • Page 48 CAUTION: Never do this. Here a child is sitting in a seat that has a shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen.

  • Page 49: Safety Belt Extender

    Safety Belt Extender Replacing Restraint System Parts After a Crash If the vehicle’s safety belt will fasten around you, you should use it. If you’ve had a crash, do you need new belts? But if a safety belt isn’t long enough to fasten, your After a very minor collision, nothing may be necessary.
  • Page 50 Section 2 Features and Controls Here you can learn about the many standard and optional features on your vehicle, and information on starting, shifting and braking. Also explained are the instrument panel and the warning systems that tell you if everything is working properly and what to do if you have a problem.

  • Page 51: Manual Windows

    Windows CAUTION: Leaving children in a vehicle with the windows closed is dangerous. A child can be overcome by the extreme heat and can suffer permanent injuries or even death from heat stroke. Never leave a child alone in a vehicle, especially with the windows closed in warm or hot weather.
  • Page 52 Power Windows (If Equipped) The driver’s door also has a switch for the passenger window. The power windows will work when the ignition has been turned to ACCESSORY or RUN. Press the rear of the switch to lower the window. Press the front of the switch to raise the window.
  • Page 53 Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons. A child or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. Don’t leave the keys in a vehicle with children.

  • Page 54: Door Locks

    Your vehicle has one Door Locks double sided key for the ignition and the door locks. CAUTION: Unlocked doors can be dangerous. Passengers especially children easily open the doors and fall out of a moving vehicle. When a door is locked, the handle won’t open it.

  • Page 55: Leaving Your Vehicle

    There are several ways to lock and unlock your vehicle. Power Door Locks (If Equipped) From the outside, use your key or the keyless entry Press the top of the power system, if your vehicle has this feature. door lock switch, marked LOCK, on either door to To lock the door from the lock both doors at once.
  • Page 56 Keyless Entry System (If Equipped) Changes or modifications to this system by other than an authorized service facility could void authorization to If your vehicle has this feature, you can lock and unlock use this equipment. your doors from about 3 feet (1 m) up to 30 feet (9 m) At times you may notice a decrease in range.

  • Page 57: Matching Transmitter(S) To Your Vehicle

    Operation Press the LOCK button to lock both doors. The interior lamps will come on for two seconds as soon as all the doors are closed. If you press the LOCK button twice the horn will chirp to confirm that the doors have locked.

  • Page 58: Battery Replacement

    Battery Replacement To replace the battery, do the following: Under normal use, the battery in your remote keyless entry transmitter should last about two years. You can tell the battery is weak if the transmitter won’t work at the normal range in any location. If you have to get close to your vehicle before the transmitter works, it’s probably time to change the battery.
  • Page 59 Resynchronization When you park your vehicle and open the driver’s door, you’ll hear a tone reminding you to remove your key Resynchronization may be necessary due to the security from the ignition and take it with you. Always do this. method used by this system.
  • Page 60 Passlock New Vehicle “Break In” Your vehicle is equipped with the Passlock theft deterrent system. NOTICE: Passlock is a passive theft deterrent system. Passlock enables fuel if the ignition lock cylinder is turned with a Your vehicle doesn’t need an elaborate valid key.

  • Page 61: Ignition Positions

    Ignition Positions LOCK (B): This position locks your ignition, steering wheel and transmission. It’s a theft deterrent feature. You can use the key to turn the ignition switch to You will only be able to remove your key when the five different positions.

  • Page 62: Automatic Transmission

    To remove the key, turn the key to OFF, press and hold NOTICE: the button and turn the key to LOCK. Do not hold the button in while turning the key to OFF. If your key seems stuck in LOCK and you can’t Starting Your Gasoline Engine turn it, be sure you are using the correct key;...

  • Page 63: Manual Transmission

    Manual Transmission When starting your engine in very cold weather (below 0 _ F or 18 _ C), do this: The gear selector should be in NEUTRAL and the 1. With your foot off the accelerator pedal, turn the parking brake engaged. Hold the clutch pedal to the ignition key to START and hold it there.
  • Page 64 Engine Coolant Heater (If Equipped) CAUTION: In very cold weather, 0 _ F 18 _ C) or colder, the Plugging the cord into an ungrounded outlet engine coolant heater can could cause an electrical shock. Also, the wrong help. You’ll get easier kind of extension cord could overheat and cause starting and better fuel economy during engine...

  • Page 65: Automatic Transmission Operation

    Automatic Transmission Operation PARK (P): This position locks your rear wheels. It’s the best position to use when you start your engine because your vehicle can’t move easily. CAUTION: It is dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set.
  • Page 66 REVERSE (R): Use this gear to back up. CAUTION: NOTICE: Shifting out of PARK (P) or NEUTRAL (N) while your engine is “racing” (running at high speed) is Shifting to REVERSE (R) while your vehicle is dangerous. Unless your foot is firmly on the moving forward could damage your brake pedal, your vehicle could move very transmission.
  • Page 67 AUTOMATIC OVERDRIVE ( ): This position is THIRD (3): This position is also used for normal for normal driving. If you need more power for passing, driving, however it offers more power and lower fuel and you’re: economy than AUTOMATIC OVERDRIVE ( Going less than about 35 mph (56 km/h), push your SECOND (2): This position gives you more power, but accelerator pedal about halfway down.

  • Page 68: Manual Transmission Operation

    FIRST (1): This position gives you even more power, Manual Transmission Operation but lower fuel economy than SECOND (2). You can use it on very steep hills, or in deep snow or mud. If the 5-Speed selector lever is put in FIRST (1) while the vehicle is Here’s how to operate moving forward, the transmission won’t shift into first your transmission.
  • Page 69 FIRST (1): Press the clutch pedal and shift into FOURTH (4) and FIFTH (5): Shift into the higher FIRST (1). Then, slowly let up on the clutch pedal as forward gears the same way you do for THIRD (3). you press the accelerator pedal. Shift into FIRST (1) Slowly let up on the clutch pedal as you press the only when the vehicle is below 5 mph (8 km/h).

  • Page 70: Shift Speeds

    Shift Speeds Up Shift Light If you have a manual transmission, you may have CAUTION: a SHIFT light. This light will show you when to shift If you skip a gear when you downshift, you could to the next higher gear for best fuel economy.

  • Page 71: Parking Brake

    Parking Brake NOTICE: To set the parking brake, hold the regular brake pedal down with your right foot. Push down the parking brake Driving with the parking brake on can cause pedal with your left foot. your rear brakes to overheat. You may have to If the ignition is on, the brake system warning light will replace them, and you could also damage other come on.

  • Page 72: Automatic Transmission Only

    Shifting Into PARK (P) 2. Move the shift lever into PARK (P) position like this: (Automatic Transmission Only) CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set.
  • Page 73 Leaving Your Vehicle With the Engine Running (Automatic Transmission Only) CAUTION: It can be dangerous to leave your vehicle with the engine running. Your vehicle could move suddenly if the shift lever is not fully in PARK (P) with the parking brake firmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch fire.
  • Page 74 Torque Lock (Automatic Transmission) Shifting Out of PARK (P) (Automatic Transmission Only) If you are parking on a hill and you don’t shift your transmission into PARK (P) properly, the weight of the Your vehicle has an Automatic Transmission Shift Lock vehicle may put too much force on the parking pawl in Control System.

  • Page 75: Parking Your Vehicle

    Parking Your Vehicle Parking Over Things That Burn (Manual Transmission Models Only) Before you get out of your vehicle, move the shift lever into REVERSE (R), and firmly apply the parking brake. Once the shift lever has been placed into REVERSE (R) with the clutch pedal pressed in, you can turn the ignition key to OFF, remove the key and release the clutch.

  • Page 76: Engine Exhaust

    Engine Exhaust Running Your Engine While You’re Parked (Automatic Transmission) It’s better not to park with the engine running. But if you CAUTION: ever have to, here are some things to know. Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you can’t see or CAUTION: smell.
  • Page 77 Tilt Wheel (If Equipped) CAUTION: A tilt steering wheel allows you to adjust the steering It can be dangerous to get out of your vehicle if wheel before you drive. the shift lever is not fully in PARK (P) with the parking brake firmly set.

  • Page 78: Turn And Lane Change Signals

    Turn Signal/Multifunction Lever Turn and Lane Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. To signal a turn, move the lever all the way up or down. When the turn is finished, the lever will return automatically.

  • Page 79: Windshield Wipers

    Headlamp High/Low-Beam Changer For a single wiping cycle, turn the knob to MIST. Hold it there until the wipers start, then let go. The wipers will To change the headlamps from low to high beam or high stop after one cycle. If you want more cycles, hold the to low beam, pull the multifunction lever all the way knob on MIST longer.

  • Page 80: Windshield Washer

    Windshield Washer Washer fluid will spray as long as you push the paddle. When you let go of the paddle, the wipers will continue At the top of the lever, to wipe for a few seconds and then either stop or return there’s a paddle with the to the preset speed.
  • Page 81 Setting Cruise Control CAUTION: CAUTION: Cruise control can be dangerous where you can’t drive safely at a steady speed. So, If you leave your cruise control switch on when don’t use your cruise control on winding you’re not using cruise, you might hit a button roads or in heavy traffic.
  • Page 82 Resuming a Set Speed Move the cruise switch from ON to R/A. Hold it there until you get up to the speed you want, and Suppose you set your cruise control at a desired speed then release the switch. (To increase your speed in and then you apply the brake.

  • Page 83: Exterior Lamps

    Using Cruise Control on Hills Exterior Lamps How well your cruise control will work on hills depends upon your speed, load and the steepness of the hills. When going up steep hills, you may have to step on the accelerator pedal to maintain your speed. If the steepness of the hill causes the vehicle speed to drop more than 15 mph (24 km/h) below the set speed, your cruise control will automatically disengage.

  • Page 84: Daytime Running Lamps

    Turn the knob clockwise to the parking lamp symbol, to Daytime Running Lamps turn on the following: Daytime Running Lamps (DRL) can make it easier for Parking Lamps others to see the front of your vehicle during the day. DRL can be helpful in many different driving Sidemarker Lamps conditions, but they can be especially helpful in the Clearance Lamps...

  • Page 85: Illuminated Entry

    When you turn off the headlamp knob, the regular lamps Illuminated Entry will go off, and your headlamps will change to the Your vehicle is equipped with an illuminated reduced brightness of DRL. entry feature. To idle your vehicle with the DRL off, set the parking When a door is opened, the dome lamps will come on if brake.

  • Page 86: Dome Lamp

    Dome Lamp You can use the DOME OVERRIDE button, located below the parking lamp and headlamp knob, to set the The dome lamp will come on when you open a door. dome lamp to come on automatically when a door is opened, or to remain off.
  • Page 87 Mirrors Camper-Type Outside Mirrors (If Equipped) Inside Day/Night Rearview Mirror Push the tab under the mirror rearward to reduce glare from headlamps behind you after dark. Pull the tab forward for normal daytime operation. If your vehicle is equipped with the camper type Outside Manual Adjust Mirrors mirrors, they can be adjusted so that you can have a...
  • Page 88 1. To adjust the mirrors when hauling a slide in camper 2. Turn the mirror head, so that the mirror surface faces or towing a trailer, turn the mirror by pushing the the rear of the vehicle. mirror head toward the front of the vehicle. 2-39...
  • Page 89 West Coast-Type Outside Mirrors Convex Outside Mirror (If Equipped) Your passenger’s side mirror may be convex. A convex mirror’s surface is curved so you can see more from the If your vehicle is equipped with the west coast type driver’s seat. mirrors, they can be adjusted so that you can have a clear view of any objects that may be behind you.

  • Page 90: Storage Compartments

    Storage Compartments Instrument Panel Cupholder Your vehicle has a cupholder located in the middle of Your vehicle includes a number of storage the instrument panel. compartments for storage of often used items. Some vehicles have storage areas in the instrument To use the cupholder, pull panel.

  • Page 91: Ashtrays And Cigarette Lighter

    Armrest Storage Compartment The storage compartment also has a folding writing table on top of the armrest lid. (If Equipped) To use the writing table, pull the latch at the rear of the table and swing the writing table forward. Use it to hold a pad of paper and a pen.

  • Page 92: Accessory Power Outlets

    Accessory Power Outlets NOTICE: Power outlets are designed for accessory plugs only. Do not hang any type of accessory or accessory bracket from the plug. Improper use of the power outlet can cause damage not covered by your warranty. Sun Visors To block out glare, you can swing down the visors.
  • Page 93 Instrument Panel Your Information System 2-44...
  • Page 94 The main components of your instrument panel are the following: A. Dome Override Button J. Fuse Block B. Exterior Lamp Controls K. Hood Release C. Air Outlets L. Parking Brake Release D. Multifunction Lever M. Tilt Lever (If Equipped) E. Instrument Panel Cluster N.

  • Page 95: Instrument Panel Cluster

    Instrument Panel Cluster United States automatic transmission shown, Canada similar Your instrument panel cluster is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, about how much fuel you have and many other things you’ll need to know to drive safely and economically.

  • Page 96: Speedometer And Odometer

    Speedometer and Odometer To reset the trip odometer, fully press the reset button located near the trip odometer readout. If the reset Your speedometer lets you see your speed in both button is not fully pressed, the trip odometer may not go miles per hour (mph) and kilometers per hour (km/h).

  • Page 97: Safety Belt Reminder Light

    Warning Lights, Gages When one of the warning lights comes on and stays on when you are driving, or when one of the gages shows and Indicators there may be a problem, check the section that tells you what to do about it. Please follow this manual’s advice. This part describes the warning lights and gages that Waiting to do repairs can be costly and even...
  • Page 98 Charging System Indicator Light Voltmeter This light should come on When your engine is not briefly when you turn on the running, but the ignition is ignition, before starting the in RUN, this gage shows engine, as a check to show your battery’s state of you it is working.

  • Page 99: Brake System Warning Light

    You can only drive for a short time with the reading in either warning zone. If you must drive, turn off all unnecessary accessories. Readings in either warning zone indicate a possible problem in the electrical system. Have the vehicle serviced as soon as possible.
  • Page 100 Anti-Lock Brake System Warning Light Engine Coolant Temperature Gage With the anti lock brake This gage shows the engine system, this light will come coolant temperature. on when you start your engine and may stay on for several seconds. That’s normal. If the light stays on, or comes on when you’re driving, your vehicle needs service.

  • Page 101: Gasoline Engine

    Malfunction Indicator Lamp (Service This system is called OBD II (On Board Diagnostics Second Generation) and is intended to Engine Soon Light in the United States assure that emissions are at acceptable levels for the life or Check Engine Light in Canada) of the vehicle, helping to produce a cleaner (Gasoline Engine) environment.
  • Page 102 Light On Steady An emission control system NOTICE: malfunction has been detected on your vehicle. Dealer or qualified service center diagnosis and service may be required. Modifications made to the engine, transmission, exhaust, intake or fuel system of your vehicle or If the Light Is Flashing the replacement of the original tires with other The following may prevent more serious damage to...
  • Page 103 If the Light Is On Steady This will be detected by the system and cause the light to turn on. You may be able to correct the emission system malfunction by considering the following: If you experience one or more of these conditions, change the fuel brand you use.

  • Page 104: Oil Pressure Gage

    Your vehicle will not pass this inspection if the OBD Oil Pressure Gage board diagnostic) system determines that critical emission control systems have not been completely diagnosed by the system. The vehicle would be considered not ready for inspection. This can happen if you have recently replaced your battery or if your battery has run down.

  • Page 105: Security Light

    Security Light NOTICE: This light will come on briefly when you turn the Damage to your engine from neglected oil key to START. problems can be costly and is not covered by your warranty. Oil pressure may vary with engine speed, outside temperature and oil viscosity, but readings above the The light will come on for five seconds after the key is low pressure zone indicate the normal operating range.

  • Page 106: Daytime Running Lamps Indicator Light

    Up Shift Light (If Equipped) Check Gages Light This light is used on models This light will come on with manual transmissions. briefly when you are starting the engine. The SHIFT indicator light will help you get the best fuel If the light comes on and stays on while you are driving, economy.

  • Page 107: Fuel Gage

    Fuel Gage The gage will first indicate empty before you are out of fuel, and you should get more fuel as soon as possible. Here are four situations you may experience with your fuel gage. None of these indicate a problem with the fuel gage.
  • Page 108 Section 3 Comfort Controls and Audio Systems In this section, you’ll find out how to operate the comfort control and audio systems offered with your vehicle. Be sure to read about the particular systems supplied with your vehicle. Comfort Controls FM Stereo Air Conditioning FM Stereo with Cassette Tape Player...

  • Page 109: Comfort Controls

    Comfort Controls Temperature Knob The middle knob on the control panel lets you select the Heater Control System temperature of the air flowing into the passenger area of your vehicle. This knob will allow you to adjust the air temperature independently of the fan knob settings. Turn the knob clockwise, toward the red area, for warmer air.
  • Page 110 Heater and Air Conditioning Control Temperature Knob System (If Equipped) The middle knob on the control panel lets you select the relative temperature of the air flowing into the passenger area of your vehicle. This knob will allow you to adjust the relative air temperature independently of the fan and knob settings.

  • Page 111: Air Conditioning

    Air Conditioning Heating On hot days, open the windows long enough to let hot The heater works best if you keep your windows closed air inside escape. This reduces the time it takes for your while using it. On cold days, use the HEATER or BI LEVEL vehicle to cool down.

  • Page 112: Ventilation System

    Ventilation System For mild outside temperatures when little heating or cooling is needed, use VENT to direct outside air through your vehicle. Air will flow through the instrument panel outlets. Your vehicle’s ventilation system supplies outside air to the inside of your vehicle when it is moving. With the side windows closed, air will flow into the front air inlet grilles, through the vehicle, and out the air exhaust valves.

  • Page 113: Audio Systems

    Ventilation Tips Audio Systems Keep the hood and front air inlet free of ice, snow or Your audio system has been designed to operate easily any other obstruction (such as leaves). The heater and give years of listening pleasure. You will get the and defroster will work far better, reducing the most enjoyment out of it if you acquaint yourself with it chance of fogging the inside of your windows.

  • Page 114: Am-Fm Stereo

    AM-FM Stereo Finding a Station FM: Press the lower knob to switch between AM, FM1 and FM2. The display shows your selection. TUNE: Turn the lower knob to tune in radio stations. SEEK: Press the right arrow to tune to the next higher station and the left arrow to tune to the next lower station and stay there.
  • Page 115 PUSHBUTTONS: The four numbered pushbuttons let 3. Press two adjoining buttons at the same time, within you return to your favorite stations. You can set up to five seconds. Whenever you press the same 14 stations (seven AM and seven FM). Just: two buttons, the station you set will return.

  • Page 116: Am-Fm Stereo With Cassette Tape Player (If Equipped)

    AM-FM Stereo with Cassette Tape Player Finding a Station (If Equipped) FM: Press the lower knob to switch between AM, FM1 and FM2. TUNE: Turn the lower knob to tune in radio stations. SEEK: Press the right arrow to tune to the next higher station and the left arrow to tune to the next lower station.
  • Page 117 In addition to the four stations already set, up to three Setting the Tone more stations may be preset on each band by pressing BASS: Slide this lever up or down to increase or two adjoining buttons at the same time. Just: decrease bass.
  • Page 118 Playing a Cassette Tape CD Adapter Kits Your tape player is built to work best with tapes that are It is possible to use a portable CD player adapter kit up to 30 to 45 minutes long on each side. Tapes longer with your cassette tape player after activating the bypass than that are so thin they may not work well in this player.

  • Page 119: Understanding Radio Reception

    Understanding Radio Reception To help avoid hearing loss or damage: Adjust the volume control to the lowest setting. Increase volume slowly until you hear comfortably The range for most AM stations is greater than for and clearly. FM, especially at night. The longer range, however, can cause stations to interfere with each other.

  • Page 120: Care Of Your Cassette Tape Player

    Care of Your Cassette Tape Player The recommended cleaning method for your cassette tape player is the use of a scrubbing action, A tape player that is not cleaned regularly can cause abrasive cleaning cassette with pads which scrub reduced sound quality, ruined cassettes or a damaged the tape head as the hubs of the cleaner cassette turn.

  • Page 121: Fixed Mast Antenna

    You may also choose a non scrubbing action, wet type Fixed Mast Antenna cleaner which uses a cassette with a fabric belt to clean The fixed mast antenna can withstand most car washes the tape head. This type of cleaning cassette will not without being damaged.
  • Page 122 Section 4 Your Driving and the Road Here you’ll find information about driving on different kinds of roads and in varying weather conditions. We’ve also included many other useful tips on driving. Defensive Driving City Driving Drunken Driving Freeway Driving Control of a Vehicle Before Leaving on a Long Trip Braking...

  • Page 123: Defensive Driving

    Defensive driving really means “be ready for anything.” On city streets, rural roads or freeways, it means “always expect the unexpected.” Assume that pedestrians or other drivers are going to be careless and make mistakes. Anticipate what they might do. Be ready for their mistakes. Rear end collisions are about the most preventable of accidents.

  • Page 124: Drunken Driving

    Drunken Driving The obvious way to solve the leading highway safety problem is for people never to drink alcohol and then Death and injury associated with drinking and driving is drive. But what if people do? How much is “too much” a national tragedy.
  • Page 125 It’s the amount of alcohol that counts. For example, if the same person drank three double martinis (3 ounces or 90 ml of liquor each) within an hour, the person’s BAC would be close to 0.12 percent. A person who consumes food just before or during drinking will have a somewhat lower BAC level.
  • Page 126 But the ability to drive is affected well below a BAC There’s something else about drinking and driving that of 0.10 percent. Research shows that the driving skills many people don’t know. Medical research shows that of many people are impaired at a BAC approaching alcohol in a person’s system can make crash injuries 0.05 percent, and that the effects are worse at night.

  • Page 127: Control Of A Vehicle

    Control of a Vehicle Braking You have three systems that make your vehicle go where Braking action involves perception time and you want it to go. They are the brakes, the steering and reaction time. the accelerator. All three systems have to do their work First, you have to decide to push on the brake pedal.

  • Page 128: Anti-Lock Brakes (Abs)

    Avoid needless heavy braking. Some people drive Anti-Lock Brakes (ABS) in spurts heavy acceleration followed by heavy Your vehicle has anti lock brakes (ABS). ABS is braking rather than keeping pace with traffic. This an advanced electronic braking system that will help is a mistake.
  • Page 129 The anti lock system can change the brake pressure faster than any driver could. The computer is programmed to make the most of available tire and road conditions. This can help you steer around the obstacle while braking hard. Here’s how anti lock works.

  • Page 130: Steering

    Remember: Anti lock doesn’t change the time you need Steering to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in Power Steering front of you, you won’t have time to apply your brakes If you lose power steering assist because the engine if that vehicle suddenly slows or stops.

  • Page 131: Steering In Emergencies

    Suppose you’re steering through a sharp curve. Then you Steering in Emergencies suddenly accelerate. Both control systems steering and There are times when steering can be more effective acceleration have to do their work where the tires meet than braking. For example, you come over a hill and the road.

  • Page 132: Off - Road Recovery

    Road Recovery You may find that your right wheels have dropped off the edge of a road onto the shoulder while you’re driving. An emergency like this requires close attention and a quick decision. If you are holding the steering wheel at the recommended 9 and 3 o’clock positions, you can turn it a full 180 degrees very quickly without removing either hand.

  • Page 133: Passing

    Passing Do not get too close to the vehicle you want to pass while you’re awaiting an opportunity. For one The driver of a vehicle about to pass another on a thing, following too closely reduces your area of lane highway waits for just the right moment, vision, especially if you’re following a larger vehicle.

  • Page 134: Loss Of Control

    Check your mirrors, glance over your shoulder and Loss of Control start your left lane change signal before moving out Let’s review what driving experts say about what happens of the right lane to pass. When you are far enough when the three control systems (brakes, steering and ahead of the passed vehicle to see its front in your acceleration) don’t have enough friction where the tires...

  • Page 135: Driving At Night

    A cornering skid and an acceleration skid are best Driving at Night handled by easing your foot off the accelerator pedal. If your vehicle starts to slide, ease your foot off the accelerator pedal and quickly steer the way you want the vehicle to go.
  • Page 136 Here are some tips on night driving. You can be temporarily blinded by approaching headlamps. It can take a second or two, or even several Drive defensively. seconds, for your eyes to readjust to the dark. When Don’t drink and drive. you are faced with severe glare (as from a driver who doesn’t lower the high beams, or a vehicle with misaimed Adjust your inside rearview mirror to reduce the...

  • Page 137: Driving In Rain And On Wet Roads

    Driving in Rain and on Wet Roads Rain and wet roads can mean driving trouble. On a wet road, you can’t stop, accelerate or turn as well because your tire road traction isn’t as good as on dry roads. And, if your tires don’t have much tread left, you’ll get even less traction.
  • Page 138 CAUTION: Wet brakes can cause accidents. They won’t work as well in a quick stop and may cause pulling to one side. You could lose control of the vehicle. After driving through a large puddle of water or a car wash, apply your brake pedal lightly until your brakes work normally.

  • Page 139: Driving Through Deep Standing Water

    Driving Through Deep Standing Water Driving Through Flowing Water NOTICE: CAUTION: If you drive too quickly through deep puddles or Flowing or rushing water creates strong forces. standing water, water can come in through your If you try to drive through flowing water, as you engine’s air intake and badly damage your might at a low water crossing, your vehicle can engine.

  • Page 140: City Driving

    City Driving One of the biggest problems with city streets is the amount of traffic on them. You’ll want to watch out for what the other drivers are doing and pay attention to traffic signals. Here are ways to increase your safety in city driving: Know the best way to get to where you are going.

  • Page 141: Freeway Driving

    Freeway Driving The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving. Too fast or slow driving breaks a smooth traffic flow. Treat the left lane on a freeway as a passing lane.

  • Page 142: Before Leaving On A Long Trip

    When you want to leave the freeway, move to the proper Here are some things you can check before a trip: lane well in advance. If you miss your exit, do not, Windshield Washer Fluid: Is the reservoir full? under any circumstances, stop and back up. Drive on Are all windows clean inside and outside? to the next exit.

  • Page 143: Highway Hypnosis

    Highway Hypnosis Hill and Mountain Roads Is there actually such a condition as “highway hypnosis”? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, the drone of the engine, and the rush of the wind against the vehicle that can make you sleepy.
  • Page 144 If you drive regularly in steep country, or if you’re planning to visit there, here are some tips that can make CAUTION: your trips safer and more enjoyable. Keep your vehicle in good shape. Check all fluid Coasting downhill in NEUTRAL (N) or with the levels and also the brakes, tires, cooling system and ignition off is dangerous.

  • Page 145: Winter Driving

    Winter Driving Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth and reflective warning triangles. And, if you will be driving under severe conditions, include a small bag of sand, a piece of old carpet or a couple of burlap bags to help provide traction.
  • Page 146 Whatever the condition smooth ice, packed, blowing or loose snow drive with caution. Accelerate gently. Try not to break the fragile traction. If you accelerate too fast, the drive wheels will spin and polish the surface under the tires even more. Your anti lock brakes improve your vehicle’s stability when you make a hard stop on a slippery road.
  • Page 147 If You’re Caught in a Blizzard Tie a red cloth to your vehicle to alert police that you’ve been stopped by the snow. Put on extra clothing or wrap a blanket around you. If you have no blankets or extra clothing, make body insulators from newspapers, burlap bags, rags, floor mats anything you can wrap around yourself or...
  • Page 148 Run your engine only as long as you must. This saves fuel. When you run the engine, make it go a little faster CAUTION: than just idle. That is, push the accelerator slightly. This uses less fuel for the heat that you get and it Snow can trap exhaust gases under your vehicle.

  • Page 149: Recreational Vehicle Towing

    Recreational Vehicle Towing Your vehicle should not be towed with all four wheels on the ground. The transmission has no provisions for There may be times when you want to tow your vehicle internal lubrication while being towed. To properly tow behind another vehicle for use at your destination.

  • Page 150: Loading Your Vehicle

    Loading Your Vehicle The Certification/Tire label also tells you the maximum weights for the front and rear axles, called Gross Axle Weight Rating (GAWR). To find out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your vehicle.
  • Page 151 CAUTION: CAUTION: Do not load your vehicle any heavier than the Things you put inside your vehicle can strike GVWR, or either the maximum front or rear and injure people in a sudden stop or turn, GAWR. If you do, parts on your vehicle can or in a crash.

  • Page 152: Towing A Trailer

    Towing a Trailer NOTICE: CAUTION: Pulling a trailer improperly can damage your vehicle and result in costly repairs not covered by If you don’t use the correct equipment and drive your warranty. To pull a trailer correctly, follow properly, you can lose control when you pull a the advice in this part, and see your dealer for trailer.

  • Page 153: If You Do Decide To Pull A Trailer

    If You Do Decide To Pull A Trailer Three important considerations have to do with weight: the weight of the trailer, If you do, here are some important points: the weight of the trailer tongue There are many different laws, including speed limit restrictions, having to do with trailering.

  • Page 154: Weight Of The Trailer Tongue

    3500HD Weight of the Trailer Tongue Axle Gross Combination The tongue load (A) of any trailer is an important Engine Ratio Weight Rating weight to measure because it affects the total or gross weight of your vehicle. The Gross Vehicle Weight 6.5L Diesel 4.63 17,000 lbs.

  • Page 155: Safety Chains

    If you’re using a weight carrying hitch, the trailer Safety Chains tongue (A) should weigh 10 percent of the total loaded You should always attach chains between your vehicle trailer weight (B). If you’re using a weight distributing and your trailer. Cross the safety chains under the hitch, the trailer tongue (A) should weigh 12 percent of tongue of the trailer to help prevent the tongue from the total loaded trailer weight (B).

  • Page 156: Driving With A Trailer

    Your trailer brake system can tap into the vehicle’s Before you start, check the trailer hitch and platform hydraulic brake system only if: (and attachments), safety chains, electrical connector, lamps, tires and mirror adjustment. If the trailer has The trailer parts can withstand 3,000 psi electric brakes, start your vehicle and trailer moving (20 650 kPa) of pressure.

  • Page 157: Turn Signals When Towing A Trailer

    Backing Up Turn Signals When Towing a Trailer Hold the bottom of the steering wheel with one hand. The arrows on your instrument panel will flash Then, to move the trailer to the left, just move that hand whenever you signal a turn or lane change. Properly to the left.

  • Page 158: Parking On Hills

    If you have a manual transmission and you are towing a Parking on Hills trailer, it’s better not to use FIFTH (5) gear. Just drive in FOURTH (4) gear (or, as you need to, a lower gear). CAUTION: When towing at high altitude on steep uphill grades, consider the following: Engine coolant will boil at a You really should not park your vehicle, with lower temperature than at normal altitudes.

  • Page 159: Parking On A Hill

    When You Are Ready to Leave After this manual, and the Index will help you find them quickly. If you’re trailering, it’s a good idea to review Parking on a Hill these sections before you start your trip. 1. Apply your regular brakes and hold the pedal down Check periodically to see that all hitch nuts and bolts while you: are tight.

  • Page 160: Power Take - Off (Pto)

    Power Take Off (PTO) To engage a PTO on a vehicle with a manual transmission: (Manual Transmission) (If Equipped) 1. Hold the clutch pedal down. 2. Set the parking brake. NOTICE: 3. Shift the transmission into NEUTRAL (N). If you have a PTO that will exceed 35 hp installed 4.
  • Page 161 Using PTO speed control in Preset Mode NOTICE: (Factory Setting): 1. Engage the PTO. Using a PTO for more than four hours without 2. Select PARK (P) or NEUTRAL (N) range. driving your vehicle can damage the transmission. Apply the parking brake if NEUTRAL (N) is If using a PTO for more than four hours without selected.
  • Page 162 Using PTO speed control in Variable Mode (Mobile): Variable Mode: PTO speed control mode can be used for both stationary and mobile applications. This mode 1. Engage the PTO. allows PTO to be controlled in a fashion similar to how 2.
  • Page 163 Section 5 Problems on the Road Here you’ll find what to do about some problems that can occur on the road. Hazard Warning Flashers Cooling System (Gasoline Engine) Other Warning Devices Engine Fan Noise Jump Starting If a Tire Goes Flat Towing Your Vehicle Changing a Flat Tire Engine Overheating (Gasoline Engine)

  • Page 164: Hazard Warning Flashers

    Hazard Warning Flashers Press the button located at the top of the steering column all the way down to make your front and rear turn signal lamps flash on and off. Your hazard warning flashers work no matter what position your key is in, and even if the key isn’t in. To turn off the flashers, press the button until the first click and release.

  • Page 165: Jump Starting

    Jump Starting NOTICE: If your battery (or batteries) have run down, you may want to use another vehicle and some jumper cables to Ignoring these steps could result in costly damage start your vehicle. But please use the following steps to to your vehicle that wouldn’t be covered by do it safely.
  • Page 166 1. Check the other vehicle. It must have a 12 volt NOTICE: battery with a negative ground system. If you leave your radio on, it could be badly NOTICE: damaged. The repairs wouldn’t be covered by your warranty. If the other system isn’t a 12 volt system with a negative ground, both vehicles can be damaged.
  • Page 167 6. Check that the jumper cables don’t have loose or missing insulation. If they do, you could get a shock. CAUTION: The vehicles could be damaged too. Before you connect the cables, here are some basic Using a match near a battery can cause battery things you should know.
  • Page 168 8. Don’t let the other end touch metal. Connect it to the positive (+) terminal of the good battery. 9. Now connect the black negative ( ) cable to 7. Connect the red positive (+) cable to the positive (+) the good battery’s terminal of the vehicle with the dead battery.
  • Page 169 Jumper Cable Removal Attach the cable at least 18 inches (45 cm) away from the dead battery, but not near engine parts that A. Heavy, Unpainted Metal Engine Part move. The electrical connection is just as good B. Good Battery there, but the chance of sparks getting back to the battery is much less.

  • Page 170: Towing Your Vehicle

    To disconnect the jumper cables from both vehicles, If your vehicle has a diesel engine, see “Engine do the following: Overheating” in the Diesel Engine Supplement. 1. Disconnect the black negative ( ) cable from the Overheated Engine Protection heavy, unpainted metal engine part on the vehicle Operating Mode that had the dead battery.
  • Page 171 If Steam Is Coming From Your Engine CAUTION: Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away from the vehicle until it cools down.

  • Page 172: If No Steam Is Coming From Your Engine

    If No Steam Is Coming From Your Engine If you no longer have the overheat warning, you can drive. Just to be safe, drive slower for about 10 minutes. If you get an engine overheat warning but see or hear no If the warning doesn’t come back on, you can steam, the problem may not be too serious.

  • Page 173: Cooling System (Gasoline Engine)

    Cooling System (Gasoline Engine) CAUTION: When you decide it’s safe to lift the hood, here’s what you’ll see: If your vehicle has air conditioning, the auxiliary electric engine cooling fan under the hood can start up even when the engine is not running and can injure you.
  • Page 174 When the engine is cold, the coolant level CAUTION: should be at or above the COLD mark. Heater and radiator hoses, and other engine parts, can be very hot. Don’t touch them. If you do, you can be burned. Don’t run the engine if there is a leak. If you run the engine, it could lose all coolant.
  • Page 175 How to Add Coolant to the Coolant NOTICE: Recovery Tank (Gasoline Engines) If you haven’t found a problem yet, but the coolant level When adding coolant, it is important that you use isn’t at or above the COLD mark, add a 50/50 mixture only DEX COOL (silicate...
  • Page 176 NOTICE: CAUTION: In cold weather, water can freeze and crack the You can be burned if you spill coolant on hot engine, radiator, heater core and other parts. engine parts. Coolant contains ethylene glycol Use the recommended coolant and the proper and it will burn if the engine parts are hot coolant mixture.
  • Page 177 CAUTION: Steam and scalding liquids from a hot cooling system can blow out and burn you badly. They are under pressure, and if you turn the radiator pressure cap even a little they can come out at high speed. Never turn the cap when the cooling system, including the radiator pressure cap, is hot.

  • Page 178: How To Add Coolant To The Radiator

    How to Add Coolant to the Radiator 2. Then keep turning the pressure cap, but now push down as you turn it. Remove the pressure cap. 1. You can remove the radiator pressure cap when the cooling system, including the radiator pressure cap and upper radiator hose, is no longer hot.
  • Page 179 3. Fill the radiator with the proper DEX COOL 4. Then fill the coolant recovery tank to the coolant mixture, up to the base of the filler neck. See COLD mark. “Engine Coolant” in the Index for more information 5. Put the cap back on the coolant recovery tank, but about the proper coolant mixture.
  • Page 180 8. Then replace the pressure cap. At any time during this procedure if coolant begins to flow out of the filler neck, reinstall the pressure cap. Be sure the arrows on the pressure cap line up like this. 6. Start the engine and let it run until you can feel the upper radiator hose getting hot.

  • Page 181: Engine Fan Noise

    Engine Fan Noise If a Tire Goes Flat Your vehicle has a clutched engine cooling fan. When It’s unusual for a tire to “blow out” while you’re driving, the clutch is engaged, the fan spins faster to provide especially if you maintain your tires properly. If air goes more air to cool the engine.

  • Page 182: Changing A Flat Tire

    Changing a Flat Tire So if you’re stopped somewhere by a flat or damaged tire or wheel, you should get expert help. See “Roadside Your truck, when new, included no tire changing Assistance” in the Index. equipment and no place to store a tire in the vehicle. Few drivers of these vehicles have the necessary equipment aboard to be able to change a flat tire safely.

  • Page 183: If You're Stuck: In Sand, Mud, Ice Or Snow

    If You’re Stuck: In Sand, Mud, NOTICE: Ice or Snow In order to free your vehicle when it is stuck, you will Spinning your wheels can destroy parts of your need to spin the wheels, but you don’t want to spin your vehicle as well as the tires.
  • Page 184 Section 6 Service and Appearance Care Here you will find information about the care of your vehicle. This section begins with service and fuel information, and then it shows how to check important fluid and lubricant levels. There is also technical information about your vehicle, and a part devoted to its appearance care.

  • Page 185: Doing Your Own Service Work

    Service Doing Your Own Service Work If you want to do some of your own service work, you’ll Your dealer knows your vehicle best and wants you to want to use the proper service manual. It tells you much be happy with it. We hope you’ll go to your dealer for more about how to service your vehicle than this manual all your service needs.
  • Page 186 Adding Equipment to the Outside of In Canada, look for the “Auto Makers’ Choice” Your Vehicle label on the fuel pump. Things you might add to the outside of your vehicle can affect the airflow around it. This may cause wind noise and affect windshield washer performance.
  • Page 187 If your vehicle is certified to meet California Emission If fuels containing MMT are used, spark plug life Standards (indicated on the underhood emission control may be reduced and your emission control system label), it is designed to operate on fuels that meet performance may be affected.

  • Page 188: Fuels In Foreign Countries

    Filling Your Tank (Gasoline Engine) NOTICE: CAUTION: Your vehicle was not designed for fuel that contains methanol. Don’t use it. It can corrode metal parts in your fuel system and also damage Gasoline vapor is highly flammable. It burns plastic and rubber parts. That damage wouldn’t violently, and that can cause very bad injuries.
  • Page 189 To remove the cap, turn it slowly to the When you put the cap back on, turn it to the right left (counterclockwise). (clockwise) until you hear a clicking sound. Make sure you fully install the cap. The diagnostic system can determine if the fuel cap has been left off or improperly CAUTION: installed.

  • Page 190: Checking Things Under The Hood

    Filling a Portable Fuel Container Checking Things Under the Hood CAUTION: CAUTION: Never fill a portable fuel container while it is in If your vehicle has air conditioning, the auxiliary your vehicle. Static electricity discharge from the engine fan under the hood can start up and container can ignite the gasoline vapor.

  • Page 191: Hood Release

    Hood Release To open the hood, first pull the handle located near the lower left side of the instrument panel. Then go to the front of the vehicle and pull up on the secondary hood release, located just to the passenger’s side of the center of the grill.

  • Page 192: Engine Compartment Overview

    Engine Compartment Overview When you open the hood, this is what you will see: A. Battery F. Engine Oil Dipstick J. Power Steering Fluid Reservoir B. Air Filter Restriction Indicator G. Automatic Transmission Dipstick K. Brake Fluid Reservoir (If Equipped) C.

  • Page 193: Noise Control System

    Noise Control System Among those acts presumed to constitute tampering are the acts listed below. The following information relates to compliance with Insulation: federal noise emission standards for vehicles with a Gross Vehicle Weight Rating (GVWR) of more than 10,000 lbs. Removal of the noise shields or any (4 536 kg).

  • Page 194: Checking Engine Oil

    Engine Oil (Gasoline Engine) Pull out the dipstick and clean it with a paper towel or cloth, then push it back in all the way. Remove it again, If your vehicle has a diesel engine, see “Engine Oil keeping the tip down, and check the level. (Diesel Engine)”...

  • Page 195: What Kind Of Engine Oil To Use

    What Kind of Engine Oil to Use NOTICE: Oils recommended for your vehicle can be identified by looking for the starburst symbol. Don’t add too much oil. If your engine has so This symbol indicates that the oil has been certified by much oil that the oil level gets above the upper the American Petroleum Institute (API).
  • Page 196 As in the chart shown previously, SAE 5W 30 is best for your vehicle. However, you can use SAE 10W 30 if it’s going to be 0 C) or above. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils, such as SAE 20W NOTICE: Use only engine oil with the American Petroleum...

  • Page 197: Engine Oil Additives

    Engine Oil Additives If none of them is true, use the long trip/highway maintenance schedule. Change the oil and filter every Don’t add anything to your oil. The recommended oils 7,500 miles (12 500 km) or 12 months whichever with the starburst symbol are all you will need for good occurs first.

  • Page 198: Engine Air Cleaner/Filter

    Engine Air Cleaner/Filter The engine air cleaner/filter assembly has an indicator (Gasoline Engines) that lets you know when the engine air cleaner/filter is dirty and needs to be serviced. The indicator is located in the air intake tube between the engine air cleaner/filter and the engine.
  • Page 199 5. Install the duct and the filter into the engine air cleaner/filter housing. Make sure that the duct fits properly into the housing. To remove the engine air cleaner/filter: 1. Unhook the retaining clips and remove the cover. 2. Lift the filter and the connected duct out of the air cleaner/filter housing.
  • Page 200 Automatic Transmission Fluid CAUTION: If your vehicle has a diesel engine, see “Automatic Transmission Fluid” in the Diesel Supplement. Operating the engine with the air cleaner/filter When to Check and Change off can cause you or others to be burned. The air cleaner not only cleans the air, it stops flame if A good time to check your automatic transmission fluid level is when the engine oil is changed.
  • Page 201 A cold fluid check can be made after the vehicle has NOTICE: been sitting for eight hours or more with the engine off, but this is used only as a reference. Let the engine run at idle for five minutes if outside temperatures are 50 Too much or too little fluid can damage your C) or more.
  • Page 202 Then, without shutting off the engine, follow these steps: 2. Push it back in all the way, wait three seconds and then pull it back out again. 3. Check both sides of the dipstick, and read the lower level. The fluid level must be in the COLD area, below the cross hatched area, for a cold check or in the HOT area or cross...

  • Page 203: How To Add Fluid

    How to Add Fluid Manual Transmission Fluid Refer to the Maintenance Schedule to determine what When to Check kind of transmission fluid to use. See “Recommended A good time to have it checked is when the engine oil is Fluids and Lubricants” in the Index. changed.

  • Page 204: Hydraulic Clutch

    Check the fluid level only when your engine is off, the How to Add Fluid vehicle is parked on a level place and the transmission Here’s how to add fluid. Refer to the Maintenance is cool enough for you to rest your fingers on the Schedule to determine what kind of fluid to use.

  • Page 205: Rear Axle

    When to Check and What to Use Rear Axle Refer to the Maintenance When to Check and Change Lubricant Schedule to determine how Refer to the Maintenance Schedule to determine how often you should check the often to check the lubricant and when to change it. fluid level in your clutch See “Scheduled Maintenance Services”...

  • Page 206: Engine Coolant

    How to Check Lubricant What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See “Recommended Fluids and Lubricants” in the Index. Engine Coolant The cooling system in your vehicle is filled with COOL engine coolant.
  • Page 207 A 50/50 mixture of clean, drinkable water and What to Use COOL coolant will: Use a mixture of one half clean, drinkable water and COOL R coolant which won’t damage Give freezing protection down to half DEX aluminum parts. If you use this coolant mixture, you Give boiling protection up to 265 F (129 don’t need to add anything else.

  • Page 208: Checking Coolant

    Checking Coolant NOTICE: If you use an improper coolant mixture, your engine could overheat and be badly damaged. The repair cost wouldn’t be covered by your warranty. Too much water in the mixture can freeze and crack the engine, radiator, heater core and other parts.
  • Page 209 The vehicle must be on a level surface. When your Add coolant mixture at the recovery tank, but be careful engine is cold, the coolant level should be at the COLD not to spill it. mark, or a little higher. When your engine is warm, the level should be up to the HOT mark, or a little higher.

  • Page 210: Power Steering Fluid

    Radiator Pressure Cap Power Steering Fluid (Gasoline Engine) The power steering fluid reservoir cap is located The radiator pressure at the front of the engine cap is located on the compartment. See “Engine passenger’s side of the Compartment Overview” engine compartment. in the Index for more information on location.

  • Page 211: Windshield Washer Fluid

    How to Check Power Steering Fluid Windshield Washer Fluid Turn the key off, let the engine compartment cool down, What to Use wipe the cap and the top of the reservoir clean, then When you need windshield washer fluid, be sure to read unscrew the cap and wipe the dipstick with a clean rag.

  • Page 212: Brake Fluid

    Open the cap labeled WASHER FLUID ONLY. Brakes Add washer fluid until the tank is full. Brake Fluid NOTICE: When using concentrated washer fluid, follow the manufacturer’s instructions for adding water. Don’t mix water with ready use washer fluid. Water can cause the solution to freeze and damage your washer fluid tank and other parts of the washer system.
  • Page 213 The other reason is that fluid is leaking out of the brake Checking Brake Fluid system. If it is, you should have your brake system fixed, since a leak means that sooner or later your brakes won’t work well, or won’t work at all. So, it isn’t a good idea to “top off”...
  • Page 214 What to Add NOTICE: When you do need brake fluid, use only DOT 3 brake fluid. Refer to “Recommended Fluids and Lubricants” Using the wrong fluid can badly damage in the Index. Use new brake fluid from a sealed container only. brake system parts.

  • Page 215: Brake Adjustment

    Brake Wear Brake Pedal Travel Your vehicle has four wheel disc brakes without wear See your dealer if the brake pedal does not return to indicators. If you ever hear a brake rubbing noise, have normal height, or if there is a rapid increase in pedal the brake linings inspected.

  • Page 216: Bulb Replacement

    Battery Contact your dealer to learn how to prepare your vehicle for longer storage periods. Your new vehicle comes with a maintenance free ACDelco battery. When it’s time for a new battery, Bulb Replacement get one that has the replacement number shown on the For any bulb changing procedure not listed in this original battery’s label.
  • Page 217 Headlamps 3. Unplug and remove the headlamp. Sealed Beam Headlamps 1. Remove the four screws from the headlamp retainer. 4. Plug in the new headlamp and put it in place. 5. Install the retainer to the headlamp and tighten the screws. 2.
  • Page 218 Composite Headlamps 4. Turn the bulb counterclockwise and remove it. 5. Put the new bulb into the assembly and turn it clockwise until it is tight. 6. Plug in the electrical connector. 1. Remove the two hex head pins at the 7.

  • Page 219: Front Turn Signal Lamps

    Front Turn Signal Lamps 4. Pull the socket out of the lamp assembly. (Sealed-Beam Headlamps) 1. Remove the two screws at the inside edge of the parking/turn signal lamp assembly. 5. Push in gently on the bulb, turn it counterclockwise and remove it from the socket.
  • Page 220 Front Turn Signal Lamps 3. Pull the socket out of the lamp assembly. (Composite Headlamps) 1. Remove the two screws and take out the parking/turn signal lamp assembly. 4. Push in gently on the bulb, turn it counterclockwise and remove it from the socket. 5.
  • Page 221 Front Sidemarker Lamps 3. Pull the bulb straight out of the socket. (Composite Headlamps) 1. Remove the two screws and pull out the parking/turn signal lamp assembly. 4. Put a new bulb into the socket and push it in until it is tight.

  • Page 222: Roof Marker Lamps

    Roof Marker Lamps 3. Slide the socket out of the lamp assembly. 1. Remove the screws and lift off the lens. 4. Push in gently on the bulb, turn it 2. Pull the bulb straight out of the socket. counterclockwise 3.

  • Page 223: Windshield Wiper Blade Replacement

    Windshield Wiper Blade Replacement Windshield wiper blades should be inspected at least twice a year for wear and cracking. See “Wiper Blade Check” in the Index for more information. Replacement blades come in different types and are removed in different ways. For proper type and length, see “Normal Maintenance Replacement Parts”...
  • Page 224 Tires CAUTION: (Continued) Your new vehicle comes with high quality tires made by a leading tire manufacturer. If you ever have questions Underinflated tires pose the same danger about your tire warranty and where to obtain service, see as overloaded tires. The resulting accident your GM Warranty booklet for details.
  • Page 225 Inflation -- Tire Pressure NOTICE: (Continued) The Certification/Tire label, which is on the rear edge of the driver’s door, or on the incomplete vehicle document If your tires have too much air (overinflation), in the cab, shows the correct inflation pressures for your you can get the following: tires when they’re cold.

  • Page 226: Tire Inspection And Rotation

    Tire Inspection and Rotation Tires should be rotated every 6,000 to 8,000 miles (10 000 to 13 000 km). Any time you notice unusual wear, rotate your tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels.
  • Page 227 After the tires have been rotated, adjust the front and rear inflation pressures as shown on the Certification/Tire label. Make certain that all wheel nuts are properly tightened. See “Wheel Nut Torque” in the Index. CAUTION: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after a time.

  • Page 228: Dual Tire Operation

    When It’s Time for New Tires Dual Tire Operation When the vehicle is new, or whenever a wheel, wheel One way to tell when it’s bolt or wheel nut is replaced, check the wheel nut time for new tires is to torque after 100, 1,000 and 6,000 miles (160, 1 600 and check the treadwear 10 000 km) of driving.

  • Page 229: Tightening The Wheel Nuts

    Tightening the Wheel Nuts CAUTION: All wheel nuts must be properly tightened. With a torque wrench, Incorrect wheel nuts or improperly tightened tighten the wheel wheel nuts can cause the wheel to become loose nuts firmly in a and even come off. This could lead to an accident. crisscross sequence Be sure to use the correct wheel nuts.
  • Page 230 CAUTION: CAUTION: Rust or dirt on a wheel, or on the parts to which Never use oil or grease on studs or nuts. If you it is fastened, can make the wheel nuts become do, the wheel nuts might come loose and the loose after a time.

  • Page 231: Buying New Tires

    Buying New Tires CAUTION: To find out what kind and size of tires you need, look at the Certification/Tire label. Mixing tires could cause you to lose control while The tires installed on your vehicle when it was new had driving.

  • Page 232: Wheel Replacement

    Wheel Alignment and Tire Balance If you need to replace any of your wheels, wheel bolts or wheel nuts, replace them only with new GM original The wheels on your vehicle were aligned and balanced equipment parts. This way, you will be sure to have the carefully at the factory to give you the longest tire life right wheel, wheel bolts and wheel nuts for your vehicle.
  • Page 233 Used Replacement Wheels NOTICE: CAUTION: The wrong wheel can also cause problems with bearing life, brake cooling, speedometer or odometer calibration, headlamp aim, bumper Putting a used wheel on your vehicle is height, vehicle ground clearance and tire or dangerous. You can’t know how it’s been used or tire chain clearance to the body and chassis.

  • Page 234: Tire Chains

    Tire Chains Appearance Care Remember, cleaning products can be hazardous. Some NOTICE: are toxic. Others can burst into flame if you strike a match or get them on a hot part of the vehicle. Some are Don’t use tire chains. They can damage your dangerous if you breathe their fumes in a closed space.

  • Page 235: Cleaning The Inside Of Your Vehicle

    Don’t use any of these unless this manual says you can. Carefully scrape off any excess stain. In many uses, these will damage your vehicle: Use a clean cloth or sponge, and change to a Alcohol clean area often. A soft brush may be used if stains are stubborn.

  • Page 236: Special Fabric Cleaning Problems

    Special Fabric Cleaning Problems Cleaning Vinyl Stains caused by such things as catsup, coffee (black), Use warm water and a clean cloth. egg, fruit, fruit juice, milk, soft drinks, vomit, urine and Rub with a clean, damp cloth to remove dirt. blood can be removed as follows: You may have to do it more than once.

  • Page 237: Care Of Safety Belts

    Care of Safety Belts Cleaning the Outside of the Windshield and Wiper Blades Keep belts clean and dry. If the windshield is not clear after using the windshield washer, or if the wiper blade chatters when running, wax, CAUTION: sap or other material may be on the blade or windshield. Clean the outside of the windshield with GM Windshield Do not bleach or dye safety belts.

  • Page 238: Cleaning The Outside Of Your Vehicle

    Cleaning the Outside of Your Vehicle Cleaning Exterior Lamps/Lenses Use only lukewarm or cold water, a soft cloth and a car The paint finish on your vehicle provides beauty, depth washing soap to clean exterior lamps and lenses. Follow of color, gloss retention and durability. instructions under “Washing Your Vehicle.”...

  • Page 239: Cleaning Tires

    Foreign materials such as calcium chloride and other Cleaning Tires salts, ice melting agents, road oil and tar, tree sap, bird To clean your tires, use a stiff brush with a tire cleaner. droppings, chemicals from industrial chimneys, etc., can damage your vehicle’s finish if they remain on painted surfaces.

  • Page 240: Chemical Paint Spotting

    Finish Damage Chemical Paint Spotting Any stone chips, fractures or deep scratches in the finish Some weather and atmospheric conditions can create should be repaired right away. Bare metal will corrode a chemical fallout. Airborne pollutants can fall upon quickly and may develop into a major repair expense. and attack painted surfaces on your vehicle.
  • Page 241 GM Vehicle Care/Appearance Materials PART NUMBER SIZE DESCRIPTION USAGE 994954 23 in. x 25 in. Polishing Cloth – Wax Treated Exterior polishing cloth 1050172 16 oz. (0.473 L) Tar and Road Oil Remover Removes tar, road oil and asphalt 1050173 16 oz.

  • Page 242: Electrical System

    Vehicle Identification Number (VIN) Service Parts Identification Label You’ll find this label on the inside of the glove box. It’s very helpful if you ever need to order parts. On this label is: your VIN, the model designation, paint information and a list of all production options and special equipment.

  • Page 243: Windshield Wipers

    Headlamps Fuses and Circuit Breakers The headlamp wiring is protected by an internal circuit The wiring circuits in your vehicle are protected from breaker. An electrical overload will cause the lamps short circuits by a combination of fuses, circuit breakers to go on and off, or in some cases to remain off.
  • Page 244 Instrument Panel Fuse Block The fuse block access door is on the driver’s side edge of the instrument panel. Pull off the cover to access the fuse block. You can remove fuses with a fuse extractor which is mounted to the fuse block access door. To remove fuses if you don’t have a fuse extractor, hold the end of the Fuse/Circuit Usage...
  • Page 245 Fuse/Circuit Usage Fuse/Circuit Usage Breaker Breaker Instrument Cluster, DRL Relay, Cluster, Comfort Controls, Lamp Switch, Keyless Entry, Low Instrument Switches, Radio Coolant Module, Illuminated Entry Illumination, Chime Module Module, DRAC (Diesel Engine) DRL Relay Not Used Front and Rear Turn Signals, Back Up Lamps Cruise Control...
  • Page 246 Underhood Fuse/Relay Center The underhood fuse/relay center is located in the rear of Name Usage the engine compartment near the brake fluid reservoir. See “Engine Compartment Overview” in the Index for Starter Relay Starter more information on location. Move the retainer clips A/C Relay Air Conditioning for the cover to access the fuse block.
  • Page 247 Name Usage Name Usage Horn Relay Horn Ignition Switch, EGR, Canister Purge, EVRV Idle Coast Fuel Pump, PCM/VCM Solenoid, MAF, Heated O RR DEFOG Not Used Fuel Heater (Diesel Engine), Water Sensor (Diesel Engine), A/C Compressor Relay, Boost Solenoid (Diesel Engine), Dual Tanks EPR (Diesel Engine) Blank...

  • Page 248: Replacement Bulbs

    Replacement Bulbs Exterior Lamps Quantity Number Interior Lamps Quantity Number Sealed Beam Headlamps H6054 Dome Lamps 9006 Composite Low Beam Reading Lamps Headlamps Door Courtesy Lamps 9005 Composite High Beam Instrument Panel Headlamps Compartment Lamp Front Marker Lamp For service information on other bulbs, contact your Front Parking and Turn Lamp 2357NA dealer’s service department.

  • Page 249: Capacities And Specifications

    Capacities and Specifications Cooling System Capacity After refill, the level must be rechecked. See “Cooling All capacities are approximate. When adding, be sure System” in the Index. to fill to the appropriate level or as recommended in this manual. Engine Quantity Please refer to “Recommended Fluids and Lubricants”...

  • Page 250: Normal Maintenance Replacement Parts

    Normal Maintenance VIN Code ......Replacement Parts Oil Filter* ......PF454 Air Cleaner Filter* .
  • Page 251 Section 7 Maintenance Schedule This section covers the maintenance required for your vehicle. Your vehicle needs these services to retain its safety, dependability and emission control performance. Introduction Part B: Owner Checks and Services Part A: Scheduled Maintenance Services Part C: Periodic Maintenance Inspections Short Trip/City Scheduled Maintenance Part D: Recommended Fluids and Lubricants Long Trip/Highway Scheduled Maintenance...

  • Page 252: Introduction

    Introduction Your Vehicle and the Environment Proper vehicle maintenance not only helps to keep your vehicle in good working condition, but also helps the environment. All recommended maintenance procedures are important. Improper vehicle maintenance can even affect the quality of the air we breathe. Improper fluid levels or the wrong tire inflation can increase the level of emissions from your vehicle.

  • Page 253: How This Section Is Organized

    How This Section is Organized “Part B: Owner Checks and Services” tells you what should be checked and when. It also explains This maintenance schedule is divided into five parts: what you can easily do to help keep your vehicle in good condition.

  • Page 254: Part A: Scheduled Maintenance Services

    Part A: Scheduled The proper fluids and lubricants to use are listed in Part D. Make sure whoever services your vehicle Maintenance Services uses these. All parts should be replaced and all necessary repairs done before you or anyone else Using Your Maintenance Schedule drives the vehicle.

  • Page 255: Scheduled Maintenance

    Scheduled Maintenance Short Trip/City Definition Short Trip/City Intervals Follow the Short Trip/City Scheduled Maintenance if Every 3,000 Miles (5 000 km): Engine Oil and Filter any one of these conditions is true for your vehicle: Change (or 3 months, whichever occurs first). Chassis Lubrication (or 3 months, whichever occurs first).
  • Page 256 Scheduled Maintenance Short Trip/City Intervals Short Trip/City Intervals Every 30,000 Miles (50 000 km): Rear Axle Fluid Every 100,000 Miles (166 000 km): Gasoline Engine Change with Extreme Overload, Trailer Towing or Only: Spark Plug Wire Inspection. Gasoline Engine High Speed Use. Fuel Filter Replacement. Only: Spark Plug Replacement.
  • Page 257 Scheduled Maintenance Long Trip/Highway Definition Long Trip/Highway Intervals Follow this scheduled maintenance only if none of the Every 7,500 Miles (12 500 km): Engine Oil and Filter conditions from the Short Trip/City Scheduled Change (or every 12 months, whichever occurs first). Maintenance are true.
  • Page 258 Scheduled Maintenance Long Trip/Highway Intervals Long Trip/Highway Intervals Every 50,000 Miles (83 000 km): Automatic Every 100,000 Miles (166 000 km): Gasoline Engine Transmission Service. Only: Spark Plug Wire Inspection. Gasoline Engine Only: Spark Plug Replacement. Gasoline Engine Every 60,000 Miles (100 000 km): Engine Accessory Only: Automatic Transmission Service (normal Drive Belt Inspection.

  • Page 259: Short Trip/City Scheduled Maintenance

    Short Trip/City Scheduled Maintenance The services shown in this schedule up to 100,000 miles # Lubricate the front suspension, kingpin bushings, (166 000 km) should be performed after 100,000 miles steering linkage, transmission shift linkage, parking (166 000 km) at the same intervals. The services shown brake cable guides, rear driveline center splines and at 150,000 miles (240 000 km) should be performed at brake pedal springs.
  • Page 260 Short Trip/City Scheduled Maintenance 3,000 Miles (5 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 261 Short Trip/City Scheduled Maintenance 12,000 Miles (20 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 262 Short Trip/City Scheduled Maintenance 15,000 Miles (25 000 km) (Continued) Diesel Engine Only: Check the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fasteners and other components are tight. Also check to be sure that the air cleaner housing is properly seated and the cover fits tightly.
  • Page 263 Short Trip/City Scheduled Maintenance 21,000 Miles (35 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 264 Short Trip/City Scheduled Maintenance 27,000 Miles (45 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 265 Short Trip/City Scheduled Maintenance Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote +.) Diesel Engine Only: Check the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fasteners and other components are tight.
  • Page 266 Short Trip/City Scheduled Maintenance 36,000 Miles (60 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Rotate tires.
  • Page 267 Short Trip/City Scheduled Maintenance 42,000 Miles (70 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 268 Short Trip/City Scheduled Maintenance 45,000 Miles (75 000 km) (Continued) Diesel Engine Only: Check the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fasteners and other components are tight. Also check to be sure that the air cleaner housing is properly seated and the cover fits tightly.
  • Page 269 Short Trip/City Scheduled Maintenance 50,000 Miles (83 000 km) DATE Change automatic transmission fluid and filter. Manual transmission fluid ACTUAL SERVICED BY: MILEAGE doesn’t require change. 51,000 Miles (85 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE...
  • Page 270 Short Trip/City Scheduled Maintenance 57,000 Miles (95 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 271 Short Trip/City Scheduled Maintenance Inspect engine accessory drive belt. An Emission Control Service. Replace fuel filter. An Emission Control Service. (See footnote If Equipped: Conduct Exhaust Gas Recirculation (EGR) system inspection as described in the service manual. An Emission Control Service. (See footnote Gasoline Engine Only: Conduct evaporative control system inspection.
  • Page 272 Short Trip/City Scheduled Maintenance 60,000 Miles (100 000 km) (Continued) Diesel Engine Only: If your engine has a thermostatically controlled cooling fan, inspect all hoses and ducts for proper hook up (or every 12 months, whichever occurs first). Be sure the valve works properly. This is a Noise Emission Control Service.
  • Page 273 Short Trip/City Scheduled Maintenance 66,000 Miles (110 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 274 Short Trip/City Scheduled Maintenance 72,000 Miles (120 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 275 Short Trip/City Scheduled Maintenance Diesel Engine Only: Check the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fasteners and other components are tight. Also check to be sure that the air cleaner housing is properly seated and the cover fits tightly.
  • Page 276 Short Trip/City Scheduled Maintenance 81,000 Miles (135 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 277 Short Trip/City Scheduled Maintenance 90,000 Miles (150 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 278 Short Trip/City Scheduled Maintenance 90,000 Miles (150 000 km) (Continued) Diesel Engine Only: Check the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fasteners and other components are tight. Also check to be sure that the air cleaner housing is properly seated and the cover fits tightly.
  • Page 279 Short Trip/City Scheduled Maintenance 96,000 Miles (160 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 280 Short Trip/City Scheduled Maintenance 100,000 Miles (166 000 km) DATE Gasoline Engine Only: Inspect spark plug wires. ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Gasoline Engine Only: Replace spark plugs. An Emission Control Service. Change automatic transmission fluid and filter. Manual transmission fluid doesn’t require change.

  • Page 281: Long Trip/Highway Scheduled Maintenance

    Long Trip/Highway Scheduled Maintenance The services shown in this schedule up to 100,000 miles # Lubricate the front suspension, kingpin bushings, (166 000 km) should be performed after 100,000 miles steering linkage, transmission shift linkage, parking (166 000 km) at the same intervals. The services shown brake cable guides, rear driveline center splines and at 150,000 miles (240 000 km) should be performed at brake pedal springs.
  • Page 282 Long Trip/Highway Scheduled Maintenance 7,500 Miles (12 500 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 283 Long Trip/Highway Scheduled Maintenance Diesel Engine Only: Check the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fasteners and other components are tight. Also check to be sure that the air cleaner housing is properly seated and the cover fits tightly.
  • Page 284 Long Trip/Highway Scheduled Maintenance 30,000 Miles (50 000 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 285 Long Trip/Highway Scheduled Maintenance Diesel Engine Only: Check the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fasteners and other components are tight. Also check to be sure that the air cleaner housing is properly seated and the cover fits tightly.
  • Page 286 Long Trip/Highway Scheduled Maintenance 45,000 Miles (75 000 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 287 Long Trip/Highway Scheduled Maintenance 50,000 Miles (83 000 km) DATE Change automatic transmission fluid and filter. Manual transmission fluid ACTUAL SERVICED BY: MILEAGE doesn’t require change. 52,500 Miles (87 500 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE...
  • Page 288 Long Trip/Highway Scheduled Maintenance 60,000 Miles (100 000 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 289 Long Trip/Highway Scheduled Maintenance If Equipped: Inspect Exhaust Gas Recirculation (EGR) system as described in the service manual. An Emission Control Service. (See footnote Gasoline Engine Only: Inspect Evaporative Control System. Check all fuel and vapor lines and hoses for proper hook up, routing and condition.
  • Page 290 Long Trip/Highway Scheduled Maintenance 67,500 Miles (112 500 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 291 Long Trip/Highway Scheduled Maintenance Diesel Engine Only: Check the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fasteners and other components are tight. Also check to be sure that the air cleaner housing is properly seated and the cover fits tightly.
  • Page 292 Long Trip/Highway Scheduled Maintenance 90,000 Miles (150 000 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear axle fluid level and add fluid as needed.
  • Page 293 Long Trip/Highway Scheduled Maintenance Diesel Engine Only: Check the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fasteners and other components are tight. Also check to be sure that the air cleaner housing is properly seated and the cover fits tightly.
  • Page 294 Long Trip/Highway Scheduled Maintenance 100,000 Miles (166 000 km) DATE Gasoline Engine Only: Inspect spark plug wires. ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Gasoline Engine Only: Replace spark plugs. An Emission Control Service. Change automatic transmission fluid and filter. Manual transmission fluid doesn’t require change.

  • Page 295: Part B: Owner Checks And Services

    Part B: Owner Checks and Services Engine Coolant Level Check Check the engine coolant level and add DEX COOL Listed in this part are owner checks and services which coolant mixture if necessary. See “Engine Coolant” in should be performed at the intervals specified to help the Index for further details.

  • Page 296: At Least Twice A Year

    At Least Twice a Year Engine Air Cleaner Filter Restriction Indicator Check Restraint System Check Your vehicle has an indicator located on the air cleaner Make sure the safety belt reminder light and all your in the engine compartment that lets you know when the belts, buckles, latch plates, retractors and anchorages are air cleaner filter is dirty and needs to be changed.
  • Page 297 Automatic Transmission Check Starter Switch Check Check the transmission fluid level; add if needed. See “Automatic Transmission Fluid” in the Index. A fluid CAUTION: loss may indicate a problem. Check the system and repair if needed. When you are doing this check, the vehicle could Hydraulic Clutch System Check move suddenly.
  • Page 298 Automatic Transmission Shift Lock Control Ignition Transmission Lock Check System Check While parked, and with the parking brake set, try to turn the ignition key to LOCK in each shift lever position. With an automatic transmission, the key should turn CAUTION: to LOCK only when the shift lever is in PARK (P).
  • Page 299 Parking Brake and Automatic Transmission Park on a fairly steep hill, with the vehicle facing PARK (P) Mechanism Check downhill. Keeping your foot on the regular brake, set the parking brake. To check the parking brake’s holding ability: CAUTION: With the engine running and transmission in NEUTRAL (N), slowly remove foot pressure from the regular brake pedal.

  • Page 300: Part C: Periodic Maintenance Inspections

    Part C: Periodic Exhaust System Inspection Maintenance Inspections Inspect the complete exhaust system. Inspect the body near the exhaust system. Look for broken, damaged, Listed in this part are inspections and services which missing or out position parts as well as open seams, should be performed at least twice a year (for instance, holes, loose connections or other conditions which could each spring and fall).

  • Page 301: Throttle System Inspection

    Throttle System Inspection Brake System Inspection (Gasoline Engine) Inspect the complete system. Inspect brake lines and hoses for proper hook up, binding, leaks, cracks, Inspect the throttle system for interference or binding, chafing, etc. Inspect disc brake pads for wear and rotors and for damaged or missing parts.

  • Page 302: Part D: Recommended Fluids And Lubricants

    Part D: Recommended Fluids USAGE FLUID/LUBRICANT and Lubricants Engine Oil Engine oil with the letters CH NOTE: Fluids and lubricants identified below by (Diesel Engine) or CG 4 is best for your vehicle. name, part number or specification may be obtained The CH 4 or CG 4 designation...
  • Page 303 USAGE FLUID/LUBRICANT USAGE FLUID/LUBRICANT Hydraulic Delco Supreme 11 Brake Fluid Manual GM Goodwrench Synthetic Brake System (GM Part No. 12377967 or Transmission Manual Transmission Fluid equivalent DOT 3 brake fluid). (GM Part No. 12346190 1 qt.) or equivalent SAE 75W 85 GL Windshield GM Optikleen...
  • Page 304 USAGE FLUID/LUBRICANT USAGE FLUID/LUBRICANT Front Wheel bearing lubricant meeting Hood and Multi Purpose Lubricant, Wheel Bearings requirements of NLGI # 2, Door Hinges Superlube (GM Part Category GC or GC LB (GM Part No. 12346241 or equivalent). No. 1051344 or equivalent). Body Door Multi Purpose Lubricant,...

  • Page 305: Part E: Maintenance Record

    Part E: Maintenance Record After the scheduled services are performed, record the date, odometer reading and who performed the service in the boxes provided after the maintenance interval. Any additional information from “Owner Checks and Services” or “Periodic Maintenance” can be added on the following record pages. Also, you should retain all maintenance receipts. Your owner information portfolio is a convenient place to store them.
  • Page 306 Maintenance Record ODOMETER DATE SERVICED BY MAINTENANCE PERFORMED READING 7-56...
  • Page 307 Maintenance Record ODOMETER DATE SERVICED BY MAINTENANCE PERFORMED READING 7-57...
  • Page 308 Maintenance Record ODOMETER DATE SERVICED BY MAINTENANCE PERFORMED READING 7-58...
  • Page 309 Section 8 Customer Assistance Information Here you will find out how to contact GMC if you need assistance. This section also tells you how to obtain service publications and how to report any safety defects. Customer Satisfaction Procedure Courtesy Transportation...

  • Page 310: Customer Satisfaction Procedure

    Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to GMC. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your dealer’s sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
  • Page 311 STEP TWO -- If after contacting a member of When contacting GMC, please remember that your dealership management, it appears your concern cannot concern will likely be resolved at a dealer’s facility. be resolved by the dealership without further help, contact...

  • Page 312: Customer Assistance For Text Telephone

    GMC encourages customers to call the toll-free number BBB Auto Line for assistance. If a U.S. customer wishes to write to GMC, Council of Better Business Bureaus, Inc. the letter should be addressed to GMC’s Customer 4200 Wilson Boulevard Assistance Center.

  • Page 313: Gm Mobility Program For Persons

    From: GM Mobility Program for Persons Puerto Rico: 1-800-496-9992 (English) with Disabilities 1-800-496-9993 (Spanish) U.S. Virgin Islands: 1-800-496-9994 This program, available to qualified applicants, can Fax Number: 313-381-0022 reimburse you up to $1,000 Canada toward aftermarket driver General Motors of Canada Limited or passenger adaptive Customer Communication Centre, 163-005 equipment you may require...

  • Page 314: Roadside Assistance

    Maps include points of interest and a list of GMC dealers along the route. Also included is a list of hotels along the route that are discounted through affiliation with “Quest International.”...

  • Page 315: Canadian Roadside Assistance

    The Roadside Assistance services listed are available holidays. Should you have any questions about roadside to retail and retail lease customers operating 2001 GMC assistance, call the GMC Roadside Assistance Center or light duty trucks for a period of 3 years/36,000 miles contact your dealer.

  • Page 316: Courtesy Transportation

    Courtesy Transportation, a customer support Warranty service can generally be completed while you program for new vehicles. wait. However, if you are unable to wait GMC helps minimize your inconvenience by providing several The Courtesy Transportation program is offered to transportation options.

  • Page 317: Warranty Information

    Courtesy Rental Vehicle Courtesy Transportation is available only at participating dealers and all program options, such as When your vehicle is unavailable due to overnight shuttle service, may not be available at every dealer. warranty repairs, your dealer may arrange to provide Please contact your dealer for specific information about you with a courtesy rental vehicle or reimburse you for availability.

  • Page 318: Reporting Safety Defects To The United

    REPORTING SAFETY REPORTING SAFETY DEFECTS TO DEFECTS TO THE UNITED THE CANADIAN GOVERNMENT STATES GOVERNMENT If you live in Canada, and you believe that your vehicle has a safety defect, you should immediately notify If you believe that your vehicle has a defect which Transport Canada, in addition to notifying General could cause a crash or could cause injury or death, Motors of Canada Limited.

  • Page 319: Reporting Safety Defects To General Motors

    1908 Colonel Sam Drive us. Please call us at 1 8782 Oshawa, Ontario L1H 8P7 8782), or write: Pontiac-GMC Customer Assistance Center P.O. Box 33172 Detroit, MI 48232 5172 8-11...
  • Page 320 2001 GMC SERVICE PUBLICATIONS ORDERING INFORMATION The following publications covering the operation and servicing of your vehicle can be purchased by filling out the Service Publication Order Form in this book and mailing it in with your check, money order, or credit card information to Helm, Incorporated (address below.)
  • Page 321 DAYTIME TELEPHONE NO. CUSTOMER SIGNATURE AREA CODE GM-GMC-ORD99 *(Prices are subject to change without notice and without incurring Note to Canadian Customers: All listed prices are quoted in U.S. funds. Canadian residents obligation. Allow ample time for delivery.) are to make checks payable in U.S.

Table of Contents