Texas Instruments TI-73 Manual Book page 21

Setting
Min
Max
Dec Frac
Start
Step
Dec Frac % Off
Number Line/Fraction Line for the TI-73
Definition
The minimum value displayed on the fraction line.
Default=L1. If you are using percent values,
must be ‚ 0 (zero).
The maximum value displayed on the fraction line.
Default = 1.
Max
Specifies whether the calculator displays the
and values as decimals or fractions. Default=
Max
Specifies where the upper or lower indicator
appears when the fraction line is first displayed.
Default = 0. If the indicator is a percent,
The distance the upper or lower indicator moves
along the fraction line when you press ! and ".
Define the upper or lower indicator step as a
decimal, fraction, or percent, or turn the step off.
Specifies whether the calculator displays the
values on the fraction line as a decimal, fraction,
percent, or exactly as entered.
> 0.
Min
Min
> 0.
Start
Page 21