Texas Instruments TI-73 Manual Book page 12

Adjusting the Number Line WINDOW Values
To adjust the appearance of the number line, press '. )
• To change the settings, enter a new
value for
• To change the
settings, position the cursor over the
desired setting and press b. Your
choice stays highlighted. Press # or
b to move to the next item.
• To exit the
to the Number Line application, press
*, or press - l.
Setting
Min
Max
Number Line/Fraction Line for the TI-73
Min Max Scale
, ,
LabelOff
screen and return
WINDOW
Definition
The minimum or maximum value
displayed on the number line.
must be less than
a
WINDOW RANGE
default=L .
20 Max
, and
Start
.
and
LabelOn
Min
, or you will get
Max
error.
Min
default= .
20
Example
Page 12