Table of Contents
Advertisement
CONTROLS AND FEATURES
Software Upgrade and Licences
Searching for New Software
If preferred, software upgrades can be searched for manually
using Search for New Software.
a
In the SETUP menu, press
Upgrade and press OK.
b
B
b
Press
or
to select Search for New Software.
c
Press OK. The television will automatically start
searching for a software upgrade, the progress bar
will move along the line.
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
48 %...
If an upgrade is found, the television will
automatically start downloading. If not, a screen will
appear stating that an upgrade is unavailable.
Network Upgrade
TOSHIBA may offer upgrades for the TV's software in the future.
The TV's software is upgraded via the Network.
Before downloading software:
Configure your TV to connect to the Internet.
NOTE: While the upgrade is being performed, you will not be
able to watch the TV.
a
In the SETUP menu, press B or b to select Software
Upgrade and press OK.
b
Press B or b to select Network Upgrade and press
OK.
NOTE: If the network is not available, a warning
message will appear.
c
The TV software upgrade will start when download
succeeds.
Software Licences
The licences for the software used in this television are available
for viewing.
a
In the SETUP menu, press B or b to select Software
Licences and press OK.
A screen will appear displaying all the licensing
information required for the televisions software.
B
b
or
to select Software
CH
31
54
System Information and Reset TV
System Information
This feature can be used to check the version of software
currently installed. When in DTV mode, it includes additional
diagnostic information such as signal strength, signal quality,
centre frequency, modulation, etc.
a
In the SETUP menu, press
Information.
b
Press OK to display the System Information.
System Information
2.1.26.0 Feb 19 2011 - 15:56:50 FW:13
WEAK
Ch25
c
For information about the signal quality of a particular
B
multiplex, press
or
d
Press OK for a screen showing detailed technical
information about the selected multiplex.
Reset TV
Selecting Reset TV will reset all TV settings, including saved
channels, to their original factory values.
a
In the SETUP menu, press
b
Press OK to select. A screen will appear warning that
all settings will be lost. Press OK to continue.
When the set powers back on, the Quick Setup
screen will appear. Press OK to advance the setup and
perform an auto tune. (See "Quick Setup" section on
page 14.)
B
b
or
to select System
TOSHIBA
2011
AVERAGE
STRONG
GOOD
b
to select that multiplex.
B
b
or
to select Reset TV.
Hide quick links:
Advertisement
Table of Contents
