Texas Instruments TI-Nspire Manual Book page 24

• You must have a TI-Nspire™ Computer Link session active for your
system to automatically notify you when a newer OS is available.
However, you can use TI-Nspire™ Computer Link or Connect-to-
Class™ software to check for OS updates manually.
• If you are connected to the Internet, your system will automatically
notify you of any TI-Nspire™ software updates when you connect
your handheld to the desktop software.
• The automatic check occurs once during any TI-Nspire™ Computer
Link session when a handheld is first connected. If you disconnect the
handheld and then reconnect it during the same session, the check is
not performed.
• If your system is up-to-date, you will receive no notification.
• You can turn off this feature if you don't want to receive
notifications automatically.
After the system has checked for an OS update, it displays the following
dialog box if a newer version is available:
To install the OS update and manage your update notifications:
1. Check to make sure you're connected to the Internet.
2. Select the options you want. You can do any combination of the
following:
• Install the OS
• Save a copy of the OS for later installation or for your own use
• Change your Automatic Notification setting
20 Using the TI-Nspire™ Computer Link Software