Texas Instruments TI-Nspire Manual Book page 15

To display a larger screen image, click
To display a smaller screen image, click
.
Adding or removing a border
The toolbar button for adding or removing a border toggles between
add and remove
contains a border.
Note: If you most recently removed the border from a screen, new
screens appear without a border. If you most recently added a border to
a screen, new screens appear with a border.
1. Click the screen capture image to select it.
2. Click
Edit > Remove Border
– or –
Click
Edit > Add Border
Adding or removing a border from a group of images
1. Click
View > Thumbnails
2. Select the group of images. You can either:
• Click the first image you want to select, and then hold down
(" on the Macintosh®) as you click each additional image.
• Select a range of images by clicking the first image in the range,
holding down Shift, and clicking the last image in the range.
3. Click
Edit > Remove Border
– or –
Click
Edit > Add Border
Navigating among screen images
To view the previous screen image, click
click .
depending on whether the selected image
or click
or click
or click
or click
or click
Using the TI-Nspire™ Computer Link Software
View > Zoom In
View > Zoom Out
to remove the border.
to add a border.
.
to remove the border.
to add a border.
View > Previous Screen
or click .
or click
Ctrl
or
11