When you fail to correctly answer the required number of cards
in a run, the StudyCards Viewer sets up a second run (Run #2)
through the same level 1 cards. Runs continue in level 1 until
you answer the required number of cards correctly.
This same process occurs for each level in a stack until the
required number of cards has been answered correctly at all
levels.
Tip
You can study levels out of sequence. For example, to skip
level 1 and level 2 cards to study level 3 cards, open the Level
menu and select level 3.
Using the Test study mode
You can study cards as a test in which the correct answers and
the results are unavailable until the test is over. All cards in a
stack are included in the test, and difficulty levels are ignored.
Press ƒ
•
The number of times cards are answered or skipped does
not count in the test score.
•
Only final answers are counted in the test score.
•
Unanswered cards are considered to be incorrect.
TI-89/TI-92 Plus/Voyage™ 200 PLT StudyCards™ Viewer
and select the Test study mode.
4:Format
Page 21