Advertisement
A
DVANCED
Tape Duplication
1 Connect the recording VCR (this VCR) and the playing VCR.
2 Connect the recording VCR (this VCR) to the TV.
Playing VCR
From audio out to AUDIO IN
IN
OUT
ANT.IN
R
AUDIO
L
RF OUT
VIDEO
From video out to VIDEO IN
Dubbing from any VCR (or video camera) to
another is simple. Explanations on this page uses
this VCR as the recording VCR.
Refer also to the manual supplied with the other
VCR (for playback).
• You can also use the front AUDIO/VIDEO
input jacks.
• The remote control operation mode is set
correctly for operating your target component.
– Press VCR to operate the VCR.
1
On VCRs
Insert a source tape in the playing VCR and a
blank tape in the recording VCR.
• If a tape without the record tab is inserted in the play-
ing VCR, playback automatically starts. In this case,
press the STOP button.
2
On TV
Turn the channel on the TV to your video
channel.
3
Select Line Input
5
∞
Press CH
or
, pointing the remote control at
this VCR, to select the external line input.
• For rear jacks, select "L-1" on the display or "A/V
IN" on the TV screen.
• For front jacks, select "L-F" on the display or
"F-A/V IN" on the TV screen.
620/75
O
PERATIONS
Recording VCR (this VCR)
AUDIO
VIDEO
Press ALT/SPEED, pointing the remote control
at this VCR, until the desired tape speed (SP, LP
or SLP) appears on the screen.
SP, LP: For PAL signal.
SP, SLP: For NTSC signal.
Press the PLAY
Press REC/OTR q at this VCR.
Remember: Press the buttons in steps 5 and 6
simultaneously to avoid missing any of the
recording.
-25-
25
(C
ONTINUED
IN
OUT
ANT.IN
R
L
RF OUT
To RF OUT
4
Select Tape Speed
5
Play Back Tape
3
button on the playing VCR.
6
Record (Copy) Tape
01.5.11, 4:42 PM
)
TV
Advertisement
