Table of Contents
Advertisement
PLAYING A DISC
Basic Playback
Getting started
•
Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD.
•
Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
•
When you play NTSC discs, the NTSC signal will be con-
verted to a modified PAL signal (60 Hz). When you select
AUTO at VDEO OUT setting, the NTSC signal will not be
converted to the PAL signal. (refer to page 18)
1
Press y/I .
• "P-ON" will appear briefly on the dis-
play panel.
2
Press OPEN/CLOSE to open disc
loading tray.
3
Place the chosen disc in the tray,
with the label facing up.
4
Press PLAY.
• The tray will close automatically, and playback will then
start from the first chapter or track of the disc. If the
playback does not start automatically, press PLAY.
• When you playback the DVD with a title menu is
recorded, it may appear on the screen. In this case,
refer to "TITLE MENU".
5
Press STOP to stop playback.
NOTES:
• A "prohibited icon" may appear at the top-
right on the TV screen during operation,
warning that a prohibited operation has
been encountered by the DVD player or the disc.
• With DVDs that use some titles for playback program
signals, playback may start from the second title, or it
may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
General Features
DVD may contain menus to navigate the disc and access
special features. Press the appropriate numerical key or use
Arrow ( L / K / B / s ) to highlight your selection in the DVD
main menu and press ENTER to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
Disc Navigation
1
Press DISC NAVIGATION.
During title playback or when resume is on:
•
A shot from each chapter including the one currently
being played will be displayed on the screen.
•
The chapter currently being played is selected in yellow.
In STOP mode (resume off):
•
The first scene of each chapter of the first title will be displayed.
2
Press Arrow (K/L/s/B) to select your desired chapter.
•
Up to 6 chapters can be displayed at one time. If the title
has more than 6 chapters, press SKIP G to go to the next
page. Press SKIP H to go back to the previous page.
•
You can change the title by moving up to the field where
the title number is shown with Arrow (K), and entering a
title number of your choice.
3
Press ENTER or PLAY.
•
Playback of the selected chapter will star t.
•
Pressing DISC NAVIGATION before pressing ENTER or
PLAY at step 3 will cease the DISC NAVIGATION func-
tion, and the playback will be stopped. The resume infor-
mation will be lost.
•
When a disc menu is shown, the DISC NAVIGATION fea-
ture does not function.
•
DISC NAVIGATION takes a few seconds to respond.
•
With some discs, part of the DISC NAVIGATION screen
may not be displayed properly. This is not a malfunction.
•
Some discs do not support DISC NAVIGATION feature.
•
While the DISC NAVIGATION is on the screen, the sound
is muted.
DVD
CD
•
It takes about 15 seconds to display 6 shots.
Pause
1
During playback, press PAUSE/STEP.
• Playback will pause and sound will be muted.
2
To continue playback, press PLAY.
Disc Menus
1
Press MENU.
• The DVD main menu will appear.
2
If the feature is not available,
appear on the TV screen.
3
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
4
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
Title Menu
1
Press TOP MENU.
• The title menu will appear.
2
If the feature is not available,
appear on the TV screen.
3
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
• Playback will begin at the selected Title.
CALLING UP A MENU SCREEN DURING PLAYBACK
•
Press MENU to call up the DVD main menu.
•
Press TOP MENU to call up the title menu.
NOTE:
• Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
DVD
Step by Step Playback
1
During playback, press PAUSE/STEP.
• Playback will pause and sound will be muted.
2
The disc advances by one frame each time
PAUSE/STEP is pressed.
3
To exit step by step playback, press PLAY.
Resume
1
During playback, press STOP.
• Resume message will appear on the TV screen.
2
Press PLAY, playback will resume from the point
at which playback was stopped.
• To cancel resume, press STOP twice.
NOTE:
• The resume playback takes a little longer to take place
compared to the normal playback.
– 13 –
DVD
CD
DVD
symbol may
DVD
symbol may
DVD
DVD
DVD
CD
EN
Advertisement
Table of Contents
