Moffat MEH 630 Instruction Booklet
  1. Manuals
  2. Brands
  3. Moffat Manuals
  4. Hob
  5. MEH 630
  6. Instruction booklet
Moffat MEH 630 Instruction Booklet

Moffat MEH 630 Instruction Booklet

Hide thumbs Also See for MEH 630:
Table of Contents

Advertisement

Quick Links

Download this manual
Please read this instruction booklet before using the appliance
1
1. Hob Top
2. Normal Hotplate - 1570 W -180 mm dia.
3. Normal Hotplate - 1040 W - 145 mm dia.
4. Rapid Hotplate - 2090 W - 180 mm dia.
5. Rapid Hotplate - 1570 W - 145 mm dia.
6. Control knobs
7. Electric Hotplates Control Light
INSTRUCTION BOOKLET
Keep this instruction book for future
reference and ensure it is passed on to any
new owner.
2
5
These instructions are only valid for :

ELECTRIC HOB

3
4
7
Any electrical work required to install
this hob should be carried out by a
qualified electrician or competent
person, in accordance with the
current regulations.
THIS HOB MUST BE EARTHED.
GB
MEH 630
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MEH 630 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Moffat MEH 630

Summary of Contents for Moffat MEH 630

  • Page 1: Electric Hob

    ELECTRIC HOB MEH 630 INSTRUCTION BOOKLET Please read this instruction booklet before using the appliance Keep this instruction book for future reference and ensure it is passed on to any new owner. 1. Hob Top Any electrical work required to install 2.

  • Page 2: Important Safety Information

    Important Safety Information You MUST read these warnings carefully before installing or using the oven. If you need assistance, contact our Customer Care Department on 08705 950950 Installation Unstable or misshapen pans should not be used on the hob as unstable pans can This hob must be installed by qualified cause an accident by tipping or spillage.

  • Page 3: Operation

    Operation Hints and Tips Saucepans for use on solid plates should have Electric Hotplates several characteristics: To switch on a hotplate, turn the relevant They should be fairly heavy duty control knob anticlockwise to the required heat They should fit the heat area exactly, or be setting.

  • Page 4: Maintenance And Cleaning

    CUSTOMER CARE remove this straw discolouration. This also For general enquiries concerning your Moffat applies to the area around the hotplates on appliance and for further information on Moffat stainless steel hobs. products, please contact: Customer Care Department Failure to clean and condition hotplates...

  • Page 5: Instructions For The Installer

    Guarantee Conditions given in the rating label. • The product is installed taking into account regulations in your new We, Moffat, undertake that if, within 12 months of country. the date of the purchase, this Moffat appliance or Before you move, please contact your nearest...

  • Page 6: Important Safety Requirements

    Important safety requirements This hob must be installed in accordance with FITTING THE GAS HOB the IEE Wiring Regulations (Current Edition). WITHOUT A COOKER HOOD ABOVE Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions.

  • Page 7: Building Over A Cupboard Or Drawer

    Building In ON/OFF SWITCH ON/OFF SWITCH Building over a cupboard or drawer FLEX OUTLET FLEX If the hob is to be installed above a cupboard OUTLET or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface.

  • Page 8: Electrical Connections

    Electrical connections The hob should be connected to a double pole This hob is designed to be connected to a switch with a minimum gap of 3 mm. between 230-240V 50Hz AC electrical supply. the switch contacts and of a type suitable for Before switching on, make sure the electricity the required load in compliance with the supply voltage is the same as that indicated...

Table of Contents