Total extension (fig. 37)
Completely folding the rear seat makes the
maximum load volume available.
290
fig. 37
To extend the boot
– Check that the lateral safety belt buck-
les (A-fig. 38) are located in their pock-
ets on the seat back and that the tab (B-
fig. 38) of the central abdominal safety
belts is hooked onto the support (C-
fig. 38).
– Remove the roll with the luggage cover.
A0B0607m
fig. 38
– Tilt the cushions forward pulling from
the handle (A-fig. 39) at the centre of
each cushion.
– remove the side headrests from the rear
seat and insert them in the special housings
on the cushions (fig. 40).
– If the car is fitted with the third head-
rest from the centre of the seat, lower it
completely.
fig. 39
A0B0118m
fig. 40
A0B0119m
A0B0120m