Installation - LinPlug MorphoX User Manual

Installation

Installation on Mac
After downloading the LinPlug MorphoX for Mac you will find a file named
"MorphoX Installer xxx.dmg" located in your download folder. The xxx Is the
actual version number, in example 100.
Double-click this file to decompress and open the image, then double-click
the installer program which will guide you through the installation process.
The instrument file "MorphoX" and the factory presets will now be placed in
the right directory for virtual instruments on your Mac.
The next time you start your host software the LinPlug MorphoX will be
listed in the AU / RTAS / VST Instrument list.
Installation on PC
After downloading the LinPlug MorphoX for PC you will find a file named
"MorphoX Installer xxx.exe" located in your download folder. The xxx Is the
actual version number, in example 100.
Start this program and the Installer will guide you through the installation
process. Make sure you choose the right directory, so your host software
finds the MorphoX. Refer to your host software's manual if you are unsure
about where the host software plug-in directory is located.
The instrument file "MorphoX.dll" and the factory presets will be placed in
the chosen directory. The next time you start your host software the LinPlug
MorphoX will be listed in the VST Instrument list.
Common to Mac and PC
After you've installed and opened the LinPlug MorphoX, for the first time
you will see a "S/N" edit box on the Settings page, which should read
"Enter here" in red letters.
Enter the serial number you have received into this edit box. If the serial
number has not been entered or it has been entered incorrectly, the LinPlug
MorphoX will remain in demo mode. To switch back to the main edit
screen click the LinPlug MorphoX logo on the rear panel or the Edit
button located bottom right.
If you have any questions regarding the installation of LinPlug MorphoX
please contact our support team at
http://www.linplug.com/support/support.htm.
LinPlug MorphoX 1.0 5