LinPlug MorphoX User Manual page 38

LFO:
Modulation
Matrix:
Oscillator:
Ring
Modulation:
Noise:
LinPlug MorphoX 1.0
An LFO or "Low Frequency Oscillator" is a periodic signal
source (usually below audio frequency range) used to
modulate another module's parameter. An LFO can be
used for a variety of effects including vibrato (by modulating
the pitch) and tremolo (by modulating the volume).
A signal "junction" where a source signal can be patched so
that it controls a destination signal. The MorphoX's
Modulation Matrix is used for tasks such as modulating an
oscillator's amplitude by an LFO.
A signal source that generates a periodic waveform at a
given frequency.
The process
multiplication. Ring Modulation produces sidebands but
suppresses both the carrier and modulating frequencies.
Specifically White Noise is a signal which contains equal
energy over its frequency range, compared to other types
of noise, white noise has a "bright" sound.
of combining two audio signals by
38