LinPlug MorphoX User Manual page 43

Osc 1 or 2 Spread Volume
Osc 2 Ringmod
Osc 2 FM Amount
Filter Cutoff
Filter Cutoff FM
Filter Resonance
Filter Env-Depth
Filter LP Volume
Filter BP Volume
Filter HP Volume
Main Amplitude
Main Pitch
Main Noise Volume
Main Osc Stereo
LinPlug MorphoX 1.0
If Spread is used in the respective
oscillator, one can hereby control the volume of
the additional voices within the range null (no
additional sound) up to the full volume.
Controls the output of oscillator 2 in the same way
as the Ringmod parameter below osc 2 in the
mixer, thus allows to dynamically change the mix of
oscillator 2 and the ring modulators output.
Controls the amount of frequency modulation of
oscillator two by oscillator one.
Cutoff frequency of the Filter, often used with an
LFO to create filter sweeps or with Velocity to
simulate an acoustic instrument's response to note
attack.
The intensity of the FM modulation of the filters
cutoff frequency.
Resonance of the Filter, sometimes a rather subtle
effect, sometimes drastic.
Controls with how much the filter envelope affects
the filter cutoff frequency.
The volume of the low pass output of the filter.
The volume of the band pass output of the filter.
The volume of the high pass output of the filter.
Used to control the overall volume of the patch.
Used to control the overall pitch of this patch.
Allows modulation of the noise amount in the
oscillator mixer.
When oscillator one or oscillator two runs in
Spread mode, the different voices are usually
centered.
43