Advertisement
Step 2:
Later, select Hard Disk Boot Priority under the Advanced BIOS Features menu and then choose the
model of the SATA hard drive onto which you want to install Microsoft Windows 2000/XP (Figure 2).
1. SCSI-0
: ST3120026AS
2. SCSI-1
: ST3120026AS
3. Bootable Add-in Cards
hi: Move
PU/PD/+/-: Change Priority
Step 3:
Set First Boot Device under the Advanced BIOS Features menu to CDROM to boot from CD-ROM after
system restarts (Figure 3).
} Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
higf: Move
Enter: Select
F5: Previous Values
Step 4:
Save and exit BIOS Setup.
SATA Hard Drive Configurations (ULi M1689)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Hard Disk Boot Priority
Figure 2
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Advanced BIOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
F10: Save
[Press Enter]
[CDROM]
[Hard Disk]
[CDROM]
[Setup]
F10: Save
Figure 3
- 4 -
Item Help
}}
Menu Level
Use <h> or <i> to
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
ESC: Exit
Item Help
Menu Level}
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
