Controls; Oven Function Control Knob; Before The First Use - Firenzi FSS 600 Instruction Booklet

Controls

Oven Function Control Knob

0 The oven is off
Conventional cooking - The heat comes from the
top and bottom element of the oven, ensuring even
heating inside the oven
Bottom heating element - The heat comes from
the bottom of the oven only
Top heating element - The heat comes from the
top element only (outer section)
Grill - The heat comes from the top element only
Mains on Indicator
The mains on light will come on when the oven function
control knob is set.
Thermostat Control Knob
Turn the thermostat control knob clockwise to select
temperatures between 50°C and MAX.
Thermostat Control Indicator (°C)
The thermostat control indicator will come on when the
thermostat control knob is turned. The indicator will
remain on until the correct temperature is reached. It will
then cycle on and off to show the temperature is being
maintained.
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Service
Force Centre. Under no circumstances should you
attempt to repair the appliance yourself.

Before the First Use

Remove all packaging, both inside and outside
the oven, before using the appliance.
Before first use, the oven should be heated without food.
During this time, an unpleasant odour may be emitted.
This is quite normal.
1. Switch the oven function control knob to
conventional cooking
2. Set the thermostat control knob to MAX.
4. Open a window for ventilation.
5. Allow the oven to run empty for approximately
45 minutes.
This procedure should be repeated with the grill
function for approximately 5-10 minutes.
.
FO 2786
MAX
200
150
FO 2179
50
100
5