Important Safety Information 2 Technical Data; Guide To Use The Instructions 3 Electrical Connection - Firenzi FSS 600 Instruction Booklet

Technical Data
Heating element ratings
Top element
Bottom element
Oven elements (total)
Grill element
Oven Light
Total Rating
Electrical Connection
The oven is designed to be connected to 230-240V (50Hz)
electricity supply.
The oven has an easily accessible terminal block which
is marked as follows:
Letter L - Live terminal
Letter N - Neutral terminal
or E - Earth terminal
THIS OVEN MUST BE EARTHED
The cable used to connect the oven to the electrical
supply must comply to the specifications given below.
For Uk use only
Connection Min. size
via Cable/flex
• 13 A socket 2.5 mm
outlet
• 13 A
spur box
• Cooker 2.5 mm
Control
Circuit
For Europe use only
Min. size Cable/flex
1.5 mm
2
1,045 W
1,880 W
1,720 W
1,895 W
Cable / flex Fuse
type
3 core 13 A
2
butyl min.
insulated
PVC/PVC
2
13 A
twin and
earth
Cable / flex type Fuse
H07 RN-F, H05 RN-F, 13 A
H05 RR-F, H05 VV-F,
H05 V2V2-F (T90),
H05 BB-F
Dimensions of recess
835 W Height
Width
Depth
Dimensions of the oven cavity
15 W
Height
Width
Depth
Oven capacity
It is necessary that you install a double pole switch
between the oven and the electricity supply (mains), with
a minimum gap of 3mm between the switch contacts and
of a type suitable for the required load in compliance with
the current rules.
The switch must not break the yellow and green earth
cable at any point.
Important
After installation and connecting, the cable must be
placed so that it cannot at any point reach a temperature
of more than 60°C above the ambient temperature.
Before the oven is connected, check that the main fuse
and the domestic installation can support the load; and
that the power supply is properly earthed.
The manufacturer declines any responsibility should
these safety measures not be carried out.
undertop 593 mm
in column 580 mm
560 mm
550 mm
335 mm
405 mm
400 mm
56 litres
13