Epson EPL-5900L Setup page 2

3.
4.
c
Caution:
Do not force the SIMM into the slot.
Be sure to insert the SIMM facing the correct way.
Do not remove any modules from the circuit board. Otherwise, the printer will
not work.
5.
6.
To confirm that the memory module is installed correctly, print a status sheet.
To remove a memory module from the printer, see "Removing a memory module"
in the Reference Guide.
Connecting the Printer
4
Plugging in the Printer
Make sure that the printer is turned off. Insert the power cord into the back of the
printer. Then plug the other end into a properly grounded electrical outlet.
Connecting the Printer to a Computer
Use a shielded, twisted-pair parallel interface cable that is IEEE-1284 compatible or
a USB Revision 1.1 compliant cable.
The required system for USB connection is as follows:
® ®
Apple Macintosh system that has a USB interface guaranteed by Apple
Computer, Inc.
® ®
Microsoft Windows system that has a USB interface guaranteed by each
manufacturer, and the preinstalled Windows 98/Me/2000 or the upgraded
Windows Me/2000 from the preinstalled Windows 98.
Note:
Be sure to connect a computer that supports bidirectional communication.
When using an inappropriate cable or connecting peripheral devices between the printer
and the computer, the communication may be unstable.
You can not connect Macintosh computers to the parallel interface of the printer.
1. Make sure that both the printer and the computer are off.
2. Attach the parallel or USB interface cable to the printer as shown.
<Parallel>
<USB>
Note:
When the cable has a grounding wire, secure the wire with the screw below of the
connector.
3. Plug the other end of the cable into the computer's parallel or USB interface
connector. See your computer's instruction manual for more information.
Installing the Printer Driver
5
When you install the printer driver, the following software are installed.
Printer driver
The printer driver gives you complete control settings over your printer with the
®
Windows Me/98/95/2000, Windows NT 4.0, and Mac OS. With it, you can
make various settings such as print quality and paper size.
EPSON Status Monitor 3
The EPSON Status Monitor 3 allows you to view printer status information such
as the amount of toner remaining and check for any printer errors.
For Windows Users
Make sure that your printer is turned off. Insert the CD-ROM that comes with your
printer in your CD-ROM drive. Then follow the on-screen instructions.
Note:
If the EPSON Installation Program screen does not appear automatically, perform either of
the following procedures.
Double-click My Computer icon, right-click CD-ROM icon, and click Open in the
menu that appears. Then double-click the Root folder, and double-click Setup.exe.
Double-click My Computer icon, right-click CD-ROM and click Open in the menu
that appears. Then double-click the folder of your language, and double-click the OS name
you're using. And double-click the Setup folder, then click Setup.exe.
About an Additional Driver
When the printer is shared with some computers (clients) in a network and the print
server's OS is Windows NT 4.0 or Windows 2000, you can install the printer driver
for the client's OS in the server as an additional driver. This allows the clients to
download the appropriate printer driver from the printer server if necessary. See
"Sharing Your Printer" in the Reference Guide for details.
For Macintosh Users
Your Macintosh must meet the following requirements to use the driver included
with the printer:
Mac OS 8.1 or later*
* To turn off QuickDraw GX, first make sure that the Caps Lock key is unlocked. Then, while holding
down the spacebar, restart your Macintosh. The Extensions Manager will open. Clear the
QuickDraw GX check box, then close the Extensions Manager.
c
Caution:
Turn off any anti-virus software before installing the printer driver.
1. Insert the printer software CD-ROM.
2. Double-click the Install Printer Driver/Utility folder.
3. Double-click the Installer icon.
4. After accepting the license agreement, Installer appears.
5. Click Install and follow the on-screen instructions.
Selecting your printer in the Chooser
After you have installed the printer driver, you need to open Chooser to select your
printer. This procedure is necessary the first time you use a printer and when you
want to switch to another printer. Your Macintosh will always print using the last
printer selected.
Click the EPL-5900L icon Select USB Port
About printer sharing
You can use the printer which is connected to a local computer by USB interface
through the network. See "Sharing Your Printer" in the Reference Guide for details.
To Know More About Your Printer
6
Reference Guide
The CD-ROM shipped with your printer includes the Reference
Guide as well as the printer driver.
Microsoft Internet Explorer 4.0 or later, or Netscape Navigator 4.0 or
later must be installed in your computer to read the Reference Guide.
How to use the printer
How to solve problems
How to keep your printer in good condition
Safety information and technical specifications
c
Caution:
To load paper into the printer, be sure to see "Handling Paper" in the Reference Guide.
Inappropriate paper handling may cause malfunctions.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without
the prior written permission of SEIKO EPSON CORPORATION.
No patent liability is assumed with respect to the use of the information contained herein. Neither is any
liability assumed for damages resulting from the use of the information contained herein.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product
or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result
of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to
this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION's
operating and maintenance instructions.
SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the
use of any options or any consumable products other than those designated as Original EPSON Products
or EPSON Approved Products by SEIKO EPSON CORPORATION.
Click here
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. EPSON disclaims any and all rights in those marks.
Copyright © 2001 by SEIKO EPSON CORPORATION, Nagano, Japan