Auto Start - Daewoo KOR-61AP Operating Instructions Manual

DO THIS... THIS HAPPENS...
1 HOUR 10 MIN 1 MIN
10 1 10
STAGE DEFROST
min min sec
1000g 100g 10g
WEIGHT
6. Touch the TIME set pads
for the cooking time you
want in the second stage.
LOCK NO CUPS
When you touch START pad, the WEIGHT DEFROST, STAGE1 and
START
STAGE2 indicators come on to confirm the power levels selected.
The WEIGHT DEFROST indicator starts blinking to show you that the
oven is in WEIGHT DEFROST mode. The display counts down the
7. Touch START pad.
time remaining in WEIGHT DEFROST mode. Turn over, break a part
and redistribute at a beep.
At the end of WEIGHT DEFROST mode, the oven will beep and start
stage one. The WEIGHT DEFROST indicator goes off and the STAGE
1 indicator starts blinking. The display counts down the time remaining
in stage one.
At the end of stage one, the oven will beep and start stage two. The
STAGE1 indicator goes off and the STAGE2 indicator starts blinking.
The display counts down the time remaining in stage two when stage
two ends, you will hear 3 beeps.
13
EXAMPLE: To set the time to
AUTO
"4:20".
START
TIME
• Touch 1 min 4 times.
• Touch 10 sec 2 times.
g

AUTO START

Allows you to program cooking to start at a time you select.
The food will automatically start cooking at the desired time.
Program is able up to 2 stages (not acceptable DEFROST)
DO THIS... THIS HAPPENS...
1. Program the desired power level and cooking time.
CLOCK/
STAGE DEFROST
A.START WEIGHT
2. Touch CLOCK/A.START
pad.
LOCK NO CUPS
1 HOUR 10 MIN 1 MIN
STAGE DEFROST
10 1 10
WEIGHT
min min sec
1000g 100g 10g
3. Touch the TIME set pads
to set the desired start
time
LOCK NO CUPS
When you touch START pad, the present time appears in the display
START
and the cooking program indicators come on.
The AUTO START indicator and the colon start blinking. When the
selected start time arrives the oven begins operating and the oven light
4. Touch START pad.
turns on. The AUTO START indicator goes off and the next stage
indicator begins to blink. When the cooking is completed you will hear 3
beeps. The oven turns off and the present time appears in the display.
NOTE: AUTO START can be used for time cooking, if clock is set. If the oven door is opened after
programming AUTO START, it is necessary to touch the START pad for the time of day to
appear in the readout so that the oven will automatically begin programmed cooking at the
chosen AUTO START time. Before setting, check to make sure the clock is showing the
correct time of day.
The AUTO START indicator lights
AUTO
and " :0" is displayed.
START
TIME
g
EXAMPLE: To set the AUTO
AUTO
START
TIME START time to "11:30".
• Touch 1 HOUR 11 times.
• Touch 10 MIN 3 times.
g
14